2AD100D-B05OA2-AS11/S019
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911237366
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 100, and a Motor Length of D."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD100D-B05OA2-AS11/S019 Rexroth Indramat AC Motor is a 2AD Series product. It is an Asynchronous Motor Type having a Motor Length of D and a Motor Size of 100. This motor type has an ambient temperature range from 0°C to 45°C. It uses the electrical holding brake. The ready-made Rexroth cables can be conveniently used or assembled with this motor type. Rexroth Indramat also provides an extensive program of plugged connections capable of optimally adapting to this motor and broad ranges of requirements. The major benefit of the cables is that they are pre-wired and do not require any additional finishing. These cables can be laid out for their continuous alternate bending use and are resistant again biologic oils, grease, and mineral oils.
Based on this motor type, the blower is connected with two or three phases to the power connection supply through a motor protection switch and blower cables. However, the blower unit works independently of the control device. The position of the power connection is on the top of this motor type. Also, the mounting style of this part number is flange mounting. The output direction of the power connection is to side A and has a power plug (Blower with plug. The cooling mode of the 2AD100D-B05OA2-AS11/S019 product is an axial blower with intake air flow having a voltage of 230 V.
With a holding brake of 30 Nm and having electrical clamp, it can be used easily. The optional holding brake can be triggered by the external control or with suitable control devices. To connect the brake, wires must be laid out with a power connector to the flange socket or terminal box. The encoder connection for this version is crafted as the flange socket on the housing case or as the cable along with a coupler.
