2AD100D-B05OA2-AS01/S001

Product Description:

The 2AD100D-B05OA2-AS01/S001 is a Bosch Rexroth product from the 2AD series of air-cooled induction motors. The unit has a motor frame size of 100 and a frame length of D. It uses flange mounting installation and has its power connection position on its top when looked at from the side of the output shaft. The output direction of the power connector is to the output shaft side of the unit. The unit utilizes an axial blower with suctioning air flow from side A of the unit to side B. The winding code of the unit is AS. The unit doesn’t have a holding brake integrated.

When used in ideal ambient conditions, the 2AD100D-B05OA2-AS01/S001 operates at a rated speed of 1500 min^-1. It can be safely operated up to a maximum speed of 9000 rpm. The performance of the unit drops below the rated values when used in adverse ambient conditions. The unit uses permanently lubricated deep-groove ball bearings with a long grease lifetime. Two permanently installed thermistors come included in the motor winding of the unit. Only one of the NTC thermistors, however, is connected at a time, while the other one serves as a spare. The sensor is monitored from the drive module to detect and prevent thermal overload.

The insulation classification of the motor is F in accordance with section 1 of the DIN VDE 0530 specification. The motor has a thermal time constant of 45 minutes. In compliance with section 1/ 2/86 of the EN 60204 specification, the unit has a min. terminal cross-section of 6 mm². The 2AD100D-B05OA2-AS01/S001 is available for purchase on Wake Industrial and includes a 12-month warranty period.