Product Description:

The 2AD100D-B05OA1-AS03-A2N1 is an induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a drive component, it supplies regulated rotary motion for machine tools, material-handling axes, and other automated stations that rely on constant torque from a three-phase source. The motor is delivered in length code D and size code 100, giving a midsize frame that fits directly to flange interfaces on gearboxes or machine housings. It is typically paired with an inverter drive so speed and torque can be adjusted to match changing process demands.

Cooling air is moved through the stator by an axial blower that operates from a 230 V auxiliary supply. This forced-ventilation method removes heat more effectively than natural convection, so the motor can sustain rated output at elevated ambient temperatures. Mechanical attachment is handled through flange mounting, which centers the 2AD frame on the driven machine without additional foot brackets. Electrical power reaches the stator windings through a connector seated on the top of the housing, and the leads exit toward Side A to simplify routing inside tight cabinets. Standard bearings support the rotor and help keep shaft movement within the limits needed for accurate motion control.

Rotor position is transmitted to the drive controller by high-resolution motor feedback, enabling fine velocity regulation and adaptive current control during load changes. The output end has a smooth shaft without a shaft seal, which is suitable for couplings or gearboxes that already provide their own sealing barrier. On the opposite side, there is no shaft extension, and the motor is supplied without a holding brake, so external hardware must secure standstill positions when power is off. Dynamic behavior complies with vibration grade R, and winding code AS indicates the stator coil set installed at the factory.