Product Description

The 2AD100D-B05OA1-AS03 is developed by Rexroth Indramat to contribute to the never-ending industrial revolution. These motors are available in a wide power range with various state-of-the-art features and cutting technology. Users can order these spindle motors with and without holding the brake. This spindle motor requires power from an AC source, providing stable voltages. The electrical connection should be tightened properly to avoid sparking or short circuit.

The Indramat 2AD100D motor can be operated with a nominal current consumption of 35 A to generate a torque of 48 Nm. The 2AD AC servo motor is designed to meet balance class R, S. With the insulation class 'F,' this spindle motor is allowed to be installed in a challenging industrial environment. With the ambient temperature controlled in the range of 0 to +45 degree Celsius, the 2AD Indramat AC motor offers a thermal time constant of 45 minutes. The minimum terminal cross-section required is 6 mm square. The rotor inertia generated equals 0.028 km-sq. It can run smoothly at a maximum speed of 9,000 revolutions per minute. It incorporates a high-quality bearing that promises smooth operation and full-service life at a rated velocity of 1,500 RPM.

The Indramat 2AD100D-B05OA1-AS03 model should not be stored in other than a horizontal position. It is designed for flange-style mounting, denoted by the digit '05' in the type code. The type code is mentioned on the nameplate attached to the motor housing. It can be installed at a maximum elevation of 1000 meters above sea level. The main spindle motor with housing and cover is protected from moving parts and objects to which voltages are applied. It is also protected against penetration by solid objects and water.