Product Description:

The 2AD100C-B05OB4-AS03-C2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. In machine tools, packaging equipment, and material-handling systems, it supplies rotary torque that is regulated by a compatible drive controller. Its flange-based housing fits standardized machine interfaces, which allows direct installation with gearboxes, belt drives, and other driven components. This layout supports repeatable mechanical alignment without requiring special mounting arrangements.

Cooling is provided by an integrated axial blower rated at 115 V, which forces air across the stator so the motor can maintain output during high-duty cycles. Feedback is supplied by high-resolution motor feedback, giving the inverter precise rotor data for tight speed control and position-oriented operation. The motor uses flange mounting, and its frame size is 100, so it fits the dimensional envelope associated with that housing size. Standard deep-groove bearings support the radial and axial loads commonly seen in pulley and coupling arrangements. The motor has a smooth shaft with a shaft seal, and it is supplied without a holding brake, so load retention must come from external braking or the drive. Side B has no second shaft end, which suits single-ended drive trains.

The active core uses code C length, which provides a mid-range lamination stack that balances torque and rotor inertia. Power and grounding conductors enter through a top-mounted connector, and the cable outlet faces side B to keep routing clear of guards or coolant lines. Dynamic behavior is rated at vibration grade R, which is suitable for typical industrial balance classes. The stator uses winding code AS for electrical characteristics matched to compatible Indramat inverters. This combination supports blower-cooled operation where stable thermal performance and accurate feedback are required.