Product Description:

The 2AD100C-B05OB1-AS01-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Designed for drive tasks in automated machining centers and handling modules, the motor converts electrical input into continuous rotary torque that can be regulated by compatible inverters and feedback loops. Its induction design supports steady operation in applications that require repeatable speed control under changing process loads. This makes the unit suitable for machine sections that must run continuously while maintaining stable output behavior.

This model relies on an axial blower for forced-air cooling, so heat generated by the stator windings is removed by a fan mounted on the housing. The blower is powered from a dedicated 230 V supply, separating thermal management from the main power circuit. A flange mounting face allows direct attachment to gearboxes or machine frames, which helps keep shaft alignment accurate. Its dynamic response is aided by vibration grade R balancing, which limits residual imbalance forces during acceleration and high-speed operation. Electrical terminations exit through a top power connection, positioning the connector above the motor body to simplify cable runs where side clearance is limited.

The wiring leaves the enclosure through cable routing on side B, helping keep the opposite end clear for other machine connections. A sealed connector interface allows quick disconnection and maintains IP protection once locked. The rotor is supplied with a balanced keyed shaft, so couplings can transmit torque without additional shaft modification. Because the motor is supplied without a holding brake, any static load retention must be handled by an external mechanical lock or by the drive through closed-loop torque control. Standard deep-groove bearings complete the assembly, while the C length and 100 frame size place the motor within the mechanical envelope used for this platform.