Product Description:

The 2AD100C-B05OA1-AS03-B2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD three-phase induction motor series. It is intended for continuous-duty use in machining centers, packaging systems, and material-handling equipment, where it converts three-phase electrical input into rotary motion for drive-controlled axes and spindles. The motor combines forced cooling with integrated feedback, allowing stable torque delivery during extended operation while also giving the controller the position information needed for accurate speed regulation and repeatable motion.

An internal blower rated at 230 V provides forced airflow through the stator ducts. This active cooling is provided by an axial blower, so heat removal remains effective even when the motor is installed in different positions on the machine. Position data are delivered by high-resolution motor feedback, allowing the inverter to regulate speed changes, orientation moves, and running accuracy with a steady response. The housing uses flange mounting, and the motor is built in size 100, which gives it a standardized bolt circle and shaft height for machine integration. Standard bearings support radial loads during high-speed operation, and the AS winding matches the motor's electrical characteristics to typical 400 V inverters.

The mechanical envelope uses length code C, which gives the motor a mid-length stator stack that balances output capability with inertia. The rotor is balanced to vibration grade R with a full key installed, helping reduce running vibration in sensitive equipment. A sealed top connector routes the power leads toward Side A, which can simplify cable entry in tightly arranged cabinets or machine frames. The motor is supplied without a holding brake, so any static load must be held by the drive or by an external device. The B-side is closed because no second shaft end is fitted, and airflow passes through internal passages rather than through exposed external openings.