2AD100B-B05RA2-AS01
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911229513
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 100, and a Motor Length of B."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
2AD100B-B05RA2-AS01 is an asynchronous motor. As per the type code, its motor size is 100 and motor length is B. The motor winding code is AS. Nominal power output of the motor is 3.5 kilowatts. The nominal torque output is 22 Nm. Base speed of the motor is 1500 RPM and the maximum speed is 9000 RPM. The nominal current rating is 17 Amps and the peak current rating is 182 Amps. The motor produces 70 dB sound on average during normal operation. Shipping weight of the 2AD100B-B05RA2-AS01 motor is approximately 37 kilograms. Bosch has designed the 2AD100B-B05RA2-AS01 motor for surface cooling. It comes with an axial cooling fan that requires 230 Volts AC input. The recommended ambient temperature for optimal performance is 0 to 45 degrees Celsius.
The 2AD100B-B05RA2-AS01 is a motor that is designed for flange mounting. When mounting vertically, care must be taken to not allow liquids (water, oil, coolant, etc.) to run into the motor along the output shaft. Even the use of a seal at the output shaft does not prevent liquids penetrating the motor. Prevent contamination by liquids penetrating the output shaft (side A shaft feed through). The motor has a plain shaft that suits friction-locked shaft-hub connections. The higher run quality and the backlash-free connection between shaft and hub are a significant advantage of this recommended design. Use tension sets, pressure sleeves or other such elements to couple in pinions, belt discs or similar drive elements when attaching the motor. The power plug on the motor is to the right and side A of the housing. Only properly trained personnel should handle and operate 2AD motors.
