Product Description

The 2AD100B-B05OB6-AS06-B2N1 Bosch Rexroth asynchronous motor is not damaged by spraying a jet of water. This motor installation in an upright orientation can be done with its output shaft either upwards or downwards. The product houses a rotor balanced with the entire key used in its shaft-hub assembly. This device supports a radial force at the output shaft based on the average speed and bearing assembly. The unit features dynamic balancing as per DIN ISO 2373 specifications. Its bearings may get damaged because of sliding friction. This motor is cooled by an air stream fed over the motor through air baffles used for cooling.

The product incorporated an output shaft with a key designed as per DIN 6885 specifications. This device has no support for foot mounting. The unit must have a minimum distance of 80mm for its airflow. Its bearings-associated grease has a reduced lifespan of 50% with vertical installation. This motor can encounter abnormal forces with improper installation leading to its damage. The product portrays IP 40 degree of protection for its shaft. This device should not be used for applications with high shock stress. The unit supports a maximum operating temperature of 55°C. Its reduced torque must not get exceeded when any one of the ambient operating conditions is exceeded.

The motor has two temperature sensors integrated into its windings. This product operation has to be undertaken by qualified personnel. The device comprises a plug with a union nut in its connection cable. This unit is capable of withstanding only low axial loads. Its holding brake operation is triggered by external control. The motor cannot be used with a special air-pressure connector. This product has to be used with an air duct or air hose of not more than 1m in length. The device dismantling is to be done by observing the instructions in the machine documentation. This 2AD100B-B05OB6-AS06-B2N1 asynchronous motor has a year’s Wake Industrial warranty and is shipped across the globe.