2AD100B-B05OB1-AS11-B2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911247340
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 100, and a Motor Length of B."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD100B-B05OB1-AS11-B2N1 asynchronous motor offered by Bosch Rexroth is used in combination with the same manufacturer’s digital drive controller. This motor installation has to be done in accordance with the instructions mentioned in its documentation. The product is CE Certified and UL Listed. This device and/or its components can get damaged when subject to frequent high-voltage inspections. The unit transportation must be done by taking care to avoid mechanical stress. It is important to do a replacement of the bearing grease if the storage duration is over five years. This motor needs to be worked on with extreme care to avoid the risk of accidents and damage.
The product comprises an electrically engaging type holding brake with 30Nm holding torque. This device is constructed to support flange-style installation. The unit is associated with an output shaft that has no shaft seal. Its rotor is balanced with entire key. This motor shaft is held in place with its holding brake. The product offers maintenance-free operation because of its asynchronous nature. This device has no possibility of getting damaged by a jet of water on its housing. The product may experience shaft damage when a powerful reverse operation takes place. This 2AD100B-B05OB1-AS11-B2N1 asynchronous motor comes with backup support with validity for one year.
The device uses an axial blower for the cooling action. This unit houses standard bearings to aid in its operation. It is capable of accepting only very low axial loads. The motor holding brake is in closed mode when the motor is in standstill mode. This product supports blowing type air stream with its axial blower. The device features protection against housing by means of the NTC thermistor that is integrated into the windings. This unit-associated feedback eliminates the need for a separate incremental encoder. It portrays a minimum terminal cross-section of 4mm2 according to EN 60204, Section 1 specifications. The asynchronous motor dispatch is executed in rugged packaging.
