Product Description:

The 2AD100B-B05OA2-AS03-C2N1 is an induction motor built by Bosch Rexroth Indramat and supplied within the 2AD 3-Phase Induction Motors series. It serves as the rotary prime mover in automated machinery, converting three-phase electrical energy into mechanical torque for conveyor drives, packaging stations, pumps, and other continuous-duty loads used in automated production equipment. With the power connectors facing Side A, cable access remains straightforward, and the absence of a shaft on the B-end supports compact mounting against bulkheads or gear stages without additional covers.

Thermal management is handled by an auxiliary fan that runs on 230 V, enabling axial blower cooling that keeps the stator windings at a stable temperature during extended operation and at lower shaft speeds. A stopping device is not integrated, and the unit is delivered without a holding brake, so static load retention must be achieved externally when the motor is at a standstill. Mechanical attachment follows flange mounting, allowing direct coupling to gearboxes or machine frames while helping maintain concentric alignment. The power interface uses a sealed connector-type power lead on top of Side A, which simplifies cable routing and helps reduce contamination at the electrical connection point. Drive torque is transferred through a smooth shaft with a shaft seal, while standard bearings support the rotor and vibration grade R keeps dynamic imbalance within limits suited to ISO machine tool installations.

Closed-loop motion accuracy is supported by high-resolution motor feedback that reports precise rotor position to the drive controller for speed regulation and repeatable motion. The motor has a frame size of 100 and a housing length of B, giving a known mounting circle and thermal mass when paired with compatible 2AD inverters in space-limited machine layouts. Winding code AS indicates the copper fill and insulation arrangement used to match the motor’s impedance to standard 400 V class drives, and the blower voltage aligns with common European control cabinet supplies.