IP4132-B518-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff IP4132-B518-0000 is part of the IP Compact Box Units series and features four output channels with a 16-bit resolution and a conversion time under 4 milliseconds. This unit has a maximum load voltage of 30 VDC, supports a CANopen fieldbus system, and is rated for IP65, IP66, and IP67 protection classes.
Internal Product Review
The IP4132-B518-0000 is a Beckhoff IP Compact Box 4-channel analog output module for CANopen networks. With 16-bit resolution and conversion time under 4 ms, the module delivers precise and responsive signal handling in distributed machine control. IP65, IP66, and IP67 protection makes the module a strong choice for decentralized industrial I/O.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IP4132-B518-0000 is a compact IP-rated analog output block produced by Beckhoff for the IP Compact Box Units series. The unit attaches to conveyor frames, gantries, or machine enclosures and provides isolated voltage outputs for field devices. By placing the outputs close to the load, it shortens cable runs and allows the central controller to update process actuators in real time within distributed automation architectures. Typical applications include pneumatic regulators and analog drive amplifiers used in packaging lines.
Communication with the station is handled through the CANopen fieldbus interface, and the integrated T-connector lets the segment continue without additional junction hardware. Each channel provides 16-bit resolution, so the controller can command fine voltage steps when trimming valve positions. The conversion cycle is completed in less than 4 ms, which limits latency between the bus update and the actual output change. Because the module offers four channels, one housing can service multiple actuators while retaining identical timing across the outputs. Sealing rated at IP65/IP66/IP67 protects the electronics against dust and water during washdown procedures. This protection allows the block to be mounted near field equipment instead of requiring installation inside a separate control cabinet.
The output driver receives voltage through an M8 power connection and passes the supply to downstream nodes through an adjacent socket, simplifying daisy-chain installations. The output stage tolerates 30 V DC, allowing operation with common 24 V supplies while providing headroom for line voltage drops. Each load must have an impedance of greater than 5 kΩ, which keeps current demand within the output amplifiers’ limits. Signal wiring terminates on M12 screw-in connectors, providing vibration-resistant connections in mobile or pressurized equipment. Power enters through one four-pin M8 connector that is coded to maintain consistent polarity. A shared 24 V ground reference connects the actuator supply and control electronics to minimize offset errors. The process image transmitted over the bus maps a separate data word to each output, allowing the controller to update the channels independently.
