IP4132-B510-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff IP4132-B510-0000 is part of the IP Compact Box Units series and provides 4 output channels with 16-bit resolution. It features channel isolation, a conversion time of less than 4 ms, and supports outputs through M12 screw-in connections. The unit uses common ground potential with 24 VDC and allows variable installation positions.
Internal Product Review
The IP4132-B510-0000 is a Beckhoff IP Compact Box analog output unit with 4 channels and 16-bit resolution. Conversion time below 4 ms and variable installation position make integration straightforward in distributed machine I/O layouts. M12 screw-in output connections further strengthen the module’s appeal for precise and dependable signal handling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IP4132-B510-0000 is an analog output box manufactured by Beckhoff within the IP Compact Box Units series. Housed in a compact, ingress-protected enclosure, the device mounts directly on a machine without requiring a control cabinet and supplies field actuators with voltage signals from the control system. Each output receives power from the control supply that passes through the unit, allowing automation controllers to set valve positions, reference levels, and other process values at remote locations. This arrangement reduces the amount of analog wiring routed back to a central enclosure while keeping the output connections close to the attached equipment.
Every channel delivers data with a 16-bit resolution, dividing the output voltage into 65,536 discrete steps for precise setpoint control. A channel converts new values in less than 4 ms, which limits loop delays when the controller updates changing analog targets. The module provides 4 channels for controlling independent loads from one box. A single M8 socket carries the fieldbus and supply lines to downstream I/O devices. Actuator wiring uses an M12 screw-in connector that resists vibration and provides a sealed interface in demanding production areas. These connections support distributed installation where exposure to dust, moisture, and routine machine vibration is expected.
The output circuitry operates at up to 30 VDC and maintains linear behavior when the connected device has an impedance of greater than 5 kΩ. This load requirement suits typical PLC-level instrumentation and prevents excessive current draw from the control supply. For diagnostics, the box provides 4 x 8 bits of control and status information, while the process image assigns 4 x 16 bits of analog data to the channel values. Electrical isolation is present between the channels and the control electronics, but the channels are not isolated from one another and therefore share a common supply reference. The flexible installation position permits horizontal, vertical, or inverted mounting without affecting operation. This mounting flexibility allows the enclosure and cable connections to be oriented around nearby machine components while maintaining access to the field wiring.
