IP3102-B510-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff IP3102-B510-0000 is part of the IP Compact Box Units series and supports a fieldbus system based on CANopen. It has 4 analog voltage input channels with differential topology, a resolution of 15 bits plus sign, and input isolation of 500 V. The unit features M12 screw-in connectors and a maximum sensor supply of 30 VDC.
Internal Product Review
The Beckhoff IP3102-B510-0000 is a compact analog voltage input box unit for CANopen networks with 4 channels. Differential input topology and 15 Bits + Sign resolution support accurate, stable signal acquisition in demanding automation tasks. A minimum conversion time of 5 ms is a particularly strong specification for responsive measurement performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IP3102-B510-0000 analog input module is built by Beckhoff for the IP Compact Box Units series. It serves as a rugged, field-installable block that converts sensor-level voltages into digital data for machine controllers in distributed automation systems. Mounted directly on machinery, it eliminates long analog cable runs and supports installation in harsh areas so that data acquisition occurs as close as possible to the process. This arrangement can reduce the effect of electrical interference on low-level analog signals while simplifying connections between sensors and the control system.
This unit accepts four separate voltage channels, and each path can measure signals anywhere within the ±10 V range typical of industrial transducers. Incoming values are quantized with a resolution of 15 bits plus sign, providing 1 part in 32,768 granularity for precise feedback. At nominal settings, the conversion engine completes a scan every 250 ms, a rate suitable for temperature loops, pressure monitoring, and other slowly changing variables. Electrical safety is supported by channel-to-channel isolation rated at 500 V, which protects upstream electronics from ground shifts or high-energy faults on the machine side. The separate input paths allow multiple voltage signals to be monitored through one compact field-mounted device.
When faster reaction is required, the minimum programmable sampling period drops to 5 ms, enabling the module to follow quicker transients without sacrificing measurement accuracy. Digitized results are transferred over CANopen, allowing simple daisy-chain wiring and standardized process data object mapping for control systems. Each differential input tolerates a maximum common-mode offset of 35 V, making the module resistant to unequal ground potentials in large installations. The high-impedance front ends present an input impedance of greater than 100 kΩ to the sensor circuit, so delicate signal sources are not excessively loaded. Ten selectable digital filters allow signal response to be adjusted for varying levels of noise and process speed. An M12 screw-in connector arrangement provides secure field connections in areas exposed to vibration. An auxiliary sensor supply of up to 30 V DC can power compatible field devices without requiring separate interface hardware near the module.
