IE6022 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff IE6022 is part of the IE Extension Box Units series and offers a single-channel differential signal interface with screw connection and a 5-pin M12 socket. It supports RS422 full duplex and RS485 half duplex modes with a default data rate of 9600 baud, and features an IP65/IP66/IP67 protection rating. The unit provides 500 V isolation to control and supports a maximum cable length of 500 meters.
Internal Product Review
The IE6022 is a Beckhoff IE Extension Box serial interface with RS422 full-duplex and RS485 half-duplex capability. IP65/IP66/IP67 protection and 500 V isolation to control support dependable operation in demanding machine environments. The module is an excellent choice for clean, stable distributed serial communication.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IE6022 extension box unit is manufactured by Beckhoff and belongs to the IE Extension Box Units series. It serves as a serial interface node that lets EtherCAT systems incorporate external RS-422 or RS-485 devices without adding a dedicated bus coupler. Within industrial automation cells, it forwards process data between field sensors or actuators and the controller, allowing modular expansion of machine functionality. Separate buffers handle 16 transmitted and 128 received bytes so polling jitter does not affect downstream devices.
This module offers a single serial channel configured for RS-422 or RS-485 communication. The line impedance is matched to 120 Ω, reducing signal reflections over long cable runs. With a default transfer speed of 9600 baud, the internal UART supports additional programmable rates while maintaining the asynchronous 8N1 frame structure. Physical wiring is accomplished through a front-mounted 5-pin M12 socket, and mode selection sets the transceiver for Full Duplex operation when RS-422 is required. Control and status occupy one byte, and five further bytes are reserved for process data, giving the EtherCAT master fixed-length telegrams.
For use on distributed machines, the extension box permits cable lengths up to 500 m when standard twisted pairs with the specified impedance are installed. An opto-isolation barrier rated at 500 V keeps the field side electrically separated from the control electronics, preventing ground offset currents. The die-cast housing carries a combined IP65/IP66/IP67 rating, so the assembly tolerates dust ingress and high-pressure water during washdowns. A selectable RS-485 mode runs in Half Duplex, allowing multiple nodes to share one pair without collisions, while the differential signaling method further improves noise immunity in electrically noisy plant environments.
