IE2041-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff IE2041-0000 is part of the IE Extension Box Units series and features 8 outputs with a maximum output current of 2 A per channel. It provides a nominal output voltage of 24 V DC, supports ohmic, inductive, and lamp loads, and carries a protection rating of IP65, IP66, and IP67. The unit measures 126 mm in height, 30 mm in width, and 26.5 mm in depth.
Internal Product Review
The Beckhoff IE2041-0000 is an IE extension box unit for distributed output control, with 8 outputs and a 24 V DC nominal output voltage. Fieldbus isolation via IP-Link and IP65/66/67 protection support dependable operation in decentralized machine installations. A 12 A total output current makes the module an excellent choice for higher-load switching applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IE2041-0000 digital output extension box is produced by Beckhoff within the IE Extension Box Units series. It acts as an interface that routes power and control signals from an upstream IP-Link master to actuators positioned in demanding industrial areas. By providing eight individually driven channels, the device supports distributed motion, valve, or indicator control without local control cabinets, which helps simplify machine wiring in automation cells.
Its electrical design is based on a nominal system voltage of 24 V DC. Each channel can source up to 2 A/channel, while the module limit is 12 A across the eight outputs. Internal group current restriction assigns 4 A to channels 0 through 3, 4 through 5, and 6 through 7 to prevent connector overload. The output stage draws only 25 mA of logic supply from the Bus Coupler, so power distribution occurs almost entirely through the two M8 4-pin feed-through sockets. With 8 discrete points mapped as 8 output bits in the process image, the unit can serve as the end device on its segment, and it supports ohmic, inductive, or lamp loads.
The cast-metal housing carries a protection rating of IP65/66/67, so it can be fastened directly to equipment frames without an additional enclosure. Galvanic separation between the field side and the bus is achieved through IP-Link isolation, which helps protect the controller from switching transients. A footprint of 30 mm width, 26.5 mm depth, and 126 mm height lets the box fit alongside other cylindrical connectors on modular mounting rails. M8 power sockets permit daisy-chaining of supply lines, and the screw-type signal header provides vibration-resistant terminations. The compact housing supports installation close to the load, which can shorten output runs and keep routing more orderly in tightly packed machinery.
