IE2002-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff IE2002-0000 is part of the IE Extension Box Units series and features eight output channels with a maximum output current of 0.5 Amps per channel. It operates at a nominal voltage of 24 VDC and offers reverse polarity protection and control/fieldbus isolation. The unit supports variable installation positions and includes M8 and M12 connectors for power feed and output connection.
Internal Product Review
The IE2002-0000 is a Beckhoff IE extension box unit with 8 output channels and a 24 VDC nominal voltage. Control/fieldbus isolation and reverse polarity protection support clean integration and dependable operation in distributed I/O assemblies. A 0.5 A max output current suits ohmic, inductive, and lamp loads well, making the module a very capable output solution for machine-level installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IE2002-0000 is a digital output extension box manufactured by Beckhoff for the IE Extension Box Units series. It acts as the field interface between an EtherCAT controller and 24 V actuators, concentrating connection points in a sealed housing that can be mounted directly on machinery. By combining power distribution and signal switching in one enclosure, the unit simplifies wiring and supports decentralized automation layouts. Its compact field-mounted design reduces the need to route individual actuator cables back to a central control cabinet.
The block accepts a nominal supply of 24 V DC, and each transistorized output can source up to 0.5 A to drive solenoids, contactors, or lamps. The internal logic consumes only 20 mA, leaving most of the available input power for connected loads. A process image with 8 output bits gives the controller direct software access to the individual output states. Each channel is routed through an M12 screw-in connector that resists loosening under vibration. Reverse-polarity protection helps prevent damage from incorrectly wired power connections, while galvanic isolation between the control electronics and fieldbus helps keep switching noise away from EtherCAT communication. The output stage supports resistive, inductive, and lamp loads, making the unit suitable for several common actuator types. Protective shutdown behavior helps safeguard the output circuitry when electrical operating limits are exceeded.
Field power enters through one 4-pin M8 connector, while network continuation is supported by one downstream 4-pin M8 socket. These compact connections support daisy-chain installation, and the variable mounting position allows the enclosure to be oriented to suit available machine space and cable routing. If a conductor is short-circuited, an electronic limiter caps the fault current at 1.5 A and reports the error to the controller. This current limiting helps isolate the affected circuit without exposing the remaining electronics to uncontrolled fault current. Each channel also provides a separate sensor supply rail rated at 0.5 A for connected feedback devices. The enclosure presents 8 channels on its face, keeping all output connections accessible for installation and inspection.
