IE1002-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Beckhoff IE1002-0000 is part of the IE Extension Box Units series and features 8 inputs with a nominal input voltage of 24 V DC. It offers control to fieldbus isolation via IP-Link and has a protection rating of IP65, IP66, and IP67. The device uses M12 screw type input connections, is housed in polyamide, and measures 30 mm in width, 126 mm in height, and 26.5 mm in depth.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IE1002-0000 is an eight-channel digital input extension box produced by Beckhoff and assigned to the IE Extension Box Units series. It attaches to a primary IP-Link master so that signals from sensors mounted close to the machine can be captured near the process and forwarded to the fieldbus without additional terminal strips. By concentrating discrete 24 V DC signals in a sealed housing, the unit reduces cabinet wiring and allows I/O expansion directly on moving or exposed sections of an automated line.
The module accepts a nominal supply of 24 V DC and maps exactly 8 Inputs into the process image, letting the controller sample each channel individually. Input circuitry complies with EN 61131-2 Type 2, so compatible sensors can be used without external resistors. Typical sensor load is 6 mA, while the internal electronics draw only 25 mA from the US auxiliary rail, which helps limit the overall power demand. An input filter of 3 ms suppresses contact bounce, and channel-to-channel isolation is omitted to keep propagation delay low. Galvanic separation is instead provided between the control level and the fieldbus through the IP-Link interface. The enclosure has protection ratings of IP65/IP66/IP67, so the M12 screw-type input connectors resist dust ingress and high-pressure water during machine washdown.
The housing has a depth of 26.5 mm, a width of 30 mm, and a height of 126 mm, allowing placement inside tight cable trays or directly on tooling frames. The enclosure is made of PA6 (Polyamide), which withstands oils and cutting fluids while keeping weight low. Power distribution is daisy-chained through one M8 male and one M8 female 4-pin connector, so several boxes can share the same supply harness. Control-to-fieldbus isolation through IP-Link helps maintain signal integrity along the chain, and the 3 ms filter supports uniform response times even when boxes are mounted far from the central controller.
Frequently Asked Questions about IE1002-0000:
Q: How many digital input channels does the IE1002-0000 extension box provide?
A: The IE1002-0000 unit offers 8 digital inputs as standard.
Q: What is the nominal input voltage required for the IE1002-0000?
A: This extension box features a nominal input voltage of 24 V DC.
Q: What protection ratings does the IE1002-0000 support?
A: The IE1002-0000 is rated at IP65, IP66, and IP67 for environmental protection.
Q: What type of input connector is used on the IE1002-0000?
A: Input connections use M12 screw type connectors for secure wiring.
Q: What material is the housing of the IE1002-0000 constructed from?
A: Housing is made from PA6 polyamide material for durability.
