EPP2816-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The EPP2816-0010 is a box module manufactured by Beckhoff as part of the EPP EtherCAT P Box Modules series. It supports 16 outputs at 0.5 A per channel, with a total output current of 3.0 A and operates at 24 VDC. The module features protection classes IP65, IP66, and IP67, and allows a maximum cable length of 30 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Beckhoff's EPP2816-0010 is an EtherCAT P I/O module from the EPP EtherCAT P Box Modules series. It combines data and 24 V power in one line so it can be installed directly on conveyor frames, tooling fixtures, or compact robotic end stations. By offering sixteen switchable outputs in a sealed housing, the unit supplies localized actuation points while minimizing the length of traditional control cabling in industrial automation systems. That design simplifies retrofits and speeds maintenance.
The module is powered by a control supply of 24 VDC. In normal operation, it draws only 100 mA from this rail, leaving ample capacity for other nodes on the branch. Internally, the logic circuits and status LEDs share a combined control current limit of 3 A, which helps protect upstream power supplies from overload. Network and energy are delivered through the EtherCAT P interface, which uses two M8 sockets with 4-pin, P-coded, shielded connectors. With these hybrid plugs, data, auxiliary voltage, and protective earth can traverse a single trunk up to 30 m long without additional distribution boxes. The device supports EtherCAT Distributed Clocks, so output switching remains synchronized to network time within sub-microsecond tolerances.
Each of the sixteen outputs switches field loads at up to 0.5 A per channel, while the aggregate load must stay below 3.0 A. Transient shorts are detected quickly, and the channel current is electronically limited to 1.5 A per channel with status reported to the host controller. The outputs operate from the peripheral supply rail and can handle ohmic, inductive, and lamp loads. Energy is delivered through two D-sub 9-pin sockets that simplify multi-core cabling to valve islands. A molded enclosure and fully encapsulated electronics provide protection to IP65, IP66, IP67 for direct machine mounting.
Frequently Asked Questions about EPP2816-0010:
Q: How many outputs are available on the Beckhoff EPP2816-0010 EtherCAT P Box Module?
A: The EPP2816-0010 supports up to 16 output channels for device control.
Q: What is the maximum output current per channel for the EPP2816-0010 module?
A: Each channel on the EPP2816-0010 can handle up to 0.5 A of output current.
Q: What types of loads can the EPP2816-0010 support?
A: This module is suitable for ohmic, inductive, and lamp loads.
Q: What protection ratings does the EPP2816-0010 EtherCAT P Box offer?
A: The EPP2816-0010 is protected to IP65, IP66, and IP67 ratings for demanding environments.
Q: What is the maximum cable length allowed for the EPP2816-0010 module?
A: The maximum total cable length for the EPP2816-0010 is 30 meters.
