EPP2334-0061 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff EPP2334-0061 is part of the EPP EtherCAT P Box Modules series and features 4 configurable channels. Its total output current is 3.0 Amps with a sensor supply voltage of 24 VDC, and it has dimensions of 30 x 86 x 22 mm. The module includes two M8 EtherCAT P ports and four M8 signal connections.
Internal Product Review
The EPP2334-0061 is a Beckhoff EtherCAT P Box module with 4 configurable channels and Type 3 inputs per EN 61131-2. Fast 50 µs turn-on and 100 µs turn-off support clean signal handling in distributed machine I/O, making the module a strong choice for efficient field-level control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EPP2334-0061 is a digital input and output module produced by Beckhoff within the EPP EtherCAT P Box Modules series. It couples process signals to the EtherCAT P network through compact M8 connectors so that sensors and actuators can be mounted directly on a machine frame. By combining communication and a 24 V supply on one cable, the unit streamlines decentralized wiring in industrial automation. This arrangement suits material-handling stations, compact cells, and retrofits where cabinet space is limited.
It provides 4 configurable channels that can each operate as a digital input or output, providing flexibility for mixed signal groups. The molded housing measures only 30 × 86 × 22 mm, allowing placement beside sensors in tight recesses. Network and power are daisy-chained through two M8 socket connectors that are 4-pin and P-coded, maintaining the EtherCAT P topology. When used as inputs, the electronics draw just 6 mA from the 24 V US rail, and a hardware filter of 10 µs suppresses contact bounce while preserving response speed. Inputs conform to Type 3 of EN 61131-2, so standard proximity switches can be wired without additional signal conditioning.
In output mode, each channel can source up to 0.5 A per channel, while an electronic fuse limits fault current to 1.5 A per channel to protect the wiring. The module’s power distribution limits the combined load to 3.0 A total. The shared UP voltage rail also provides a sensor supply capacity of 0.5 A. Typical actuation begins after only 50 µs and switches off in 100 µs, enabling rapid valve or relay control in high-cycle machines. Separate UP and US feeds, both nominally 24 VDC, isolate load power from logic voltage so that a short circuit on an actuator does not disrupt fieldbus communication. Signal lines terminate on four additional M8 sockets, allowing quick-connect installation directly on conveyors, gantries, or assembly fixtures.
