ELX1054 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
MPN: ELX1054-0000
The Beckhoff ELX1054, part of the EL EtherCAT Terminals series, features a NAMUR (IEC 60947-5-6) specification and supports a 2-wire connection method. It has four inputs and a typical open circuit voltage of 8.2 V DC. The terminal weighs approximately 55 grams and operates with a 24 V DC supply voltage.
Internal Product Review
The ELX1054 from Beckhoff is a highly reliable terminal for integrating NAMUR sensors in automation systems. Its fast switching capabilities, built-in fault detection, and compact form make it a dependable component for precision monitoring and control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Beckhoff ELX1054 belongs to the EtherCAT Terminal and is an effective solution for driving NAMUR sensors (IEC 60947-5-6) within automation systems.
The terminal has four inputs and connects via two wires, allowing users to handle various NAMUR-compatible sensors in process control systems. The terminal operates with an open circuit voltage that reaches 8.2 V DC to power these sensors adequately. The ELX1054 accomplishes accurate signal processing tasks that set it apart from other models. The device separates 0 from 1 signal currents using a minimum threshold of 1.2 mA for 0 signals and a maximum threshold of 2.1 mA for 1 signals. The hysteresis feature functions with 200 µA to provide reliable system operation that prevents incorrect trigger events. The terminal maintains a strong fault detection system that activates cable break alerts at a current level of ≤ 200 µA and performs short-circuit detection at current readings higher than 6.3 mA to ensure system reliability. The terminal supports high-speed operations by enabling switching frequencies up to 5 kHz under a 50% duty factor.
Its electronic systems are powered by power contacts that receive 24 V DC from the ELX9560 power source. Power contact consumption of 15 mA plus the load current, along with 70 mA current consumption over the E-bus, ensures energy efficiency. The terminal is easy to integrate into control systems because of its small size and 55 g weight. The EtherCAT terminal maintains consistent and quick NAMUR sensor processing while operating in industrial settings and requires low maintenance because it implements automatic fault diagnostics. It can be purchased at Wake Industrial with a one-year warranty.
