ELX1052
Wake Industrial LLC is not an authorized distributor of this product.
MPN: ELX1052-0000
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Beckhoff ELX1052, part of the EL EtherCAT Terminals series, complies with the NAMUR (IEC 60947-5-6) specification and features two inputs. It operates with a supply voltage of 24 V DC, has a short-circuit current of 8.2 mA, and weighs approximately 55 g. Its max switching frequency is 50 Hz with a duty factor of 50%.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
As an industrial automation solution, the Beckhoff ELX1052 EtherCAT Terminal enables customers to connect NAMUR sensors (per IEC 60947-5-6).
The terminal supports typical NAMUR sensor use by utilizing a two-wire connection mechanism with two inputs. 8.2 V DC is the Open Circuit Voltage, which is sufficient voltage to run sensors. The terminal detects "0" signals when the current reaches < 1.2 mA and "1" signals when the current reaches > 2.1 mA. This allows the terminal to discriminate between two levels of signal current during signal processing. By minimizing signal fluctuations, the switching hysteresis's standard 200 µA specification ensures operational stability. When the current is less than 200 µA, the ELX1052 terminal initiates cable break detection; when the current is greater than 6.3 mA, it initiates short circuit detection. By identifying broken electrical connections, the terminal system's built-in features increase operational dependability. Applications requiring average signal speed transitions can benefit from this terminal's ability to switch at a frequency of 50 Hz with a 50% duty cycle.
Through power connections that are powered by ELX9560 electronics units, electricity from a 24 V DC source enters the terminal. The terminal runs as energy-efficiently as possible thanks to the power connections' 10 mA combined with load currents and the E-bus power's 50 mA demand. With a weight of about 55 g, the terminal offers a small and lightweight solution that makes it simple to use in industrial control systems. The interface performs robustly and detects errors in automated factories while providing NAMUR sensors with dependable service at a reasonable cost. It can be purchased at Wake Industrial with a one-year warranty.
Frequently Asked Questions about ELX1052:
Q: What kind of sensors are supported by the ELX1052 terminal?
A: The ELX1052 supports NAMUR sensors compliant with IEC 60947-5-6, using a 2-wire connection system across two input channels.
Q: How does the ELX1052 detect signal status?
A: It identifies a signal as “0” when the current is ≤ 1.2 mA and as “1” when the current is ≥ 2.1 mA, ensuring precise signal interpretation.
Q: Does the ELX1052 include fault detection features?
A: Yes, it includes built-in cable break detection for current < 200 µA and short-circuit detection for current > 6.3 mA.
Q: What powers the ELX1052 terminal?
A: The terminal is powered via a 24 V DC supply through power contacts and receives its E-bus supply from ELX9560 electronics units.
Q: Is the ELX1052 suited for compact installations?
A: Yes, its small form factor and 55 g weight make it easy to integrate into space-constrained industrial control panels.
