EL6692 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
MPN: EL6692-0000
The Beckhoff EL6692 is part of the EL EtherCAT Terminals series and features a single RJ45 connection with a data transfer rate of 100 Mbit/s. It has a protection rating of IP20 and supports maximum cable lengths up to 100 meters. The terminal's dimensions are 15 mm by 100 mm by 70 mm.
Internal Product Review
The EL6692 is a Beckhoff EtherCAT terminal with a 1 x RJ45 connection and a 100BASE-TX physical layer. Support for 100 Mbit/s data transfer and up to 512 bytes of process data gives the terminal efficient, responsive communication in control networks. IP20 protection and an operating range of -25°C to +60°C make the EL6692 a strong fit for dependable industrial integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EL6692 is an EtherCAT bridge terminal engineered by Beckhoff and supplied as part of the EL EtherCAT Terminals series. Installed on a DIN rail alongside standard I/O slices, the unit serves as an interface module that forwards real-time process data between an upstream master and a secondary EtherCAT network. In multi-axis machines or distributed safety cells, it synchronizes data frames so that motion controllers, drives, and sensors remain time-aligned without requiring a separate switch or PC-based router.
Communication with the adjacent network is provided through one RJ45 port, allowing common Cat5e cabling to be used without custom connectors. An integrated PHY clocks the signal at 100 Mbit/s, which supports the cycle-time requirements of deterministic fieldbus traffic. The terminal can stream up to 512 bytes of process data per EtherCAT frame, allowing sizable PDO maps or safety telegrams to pass in one cycle. The maximum link distance is 100 m, supporting communication across factory floors while maintaining signal integrity over copper cabling. The IP20 housing protects against accidental contact with internal components, but the terminal must be installed in an enclosure where dust or liquids may be present.
The slim housing measures 15 mm × 100 mm × 70 mm, keeping bus stations compact and leaving more rail space for analog or power modules. Continuous operation is supported from -25 °C to +60 °C, which covers most plant interiors without active heating or cooling. Data moves across the cable using the 100BASE-TX physical layer, allowing the terminal to operate with standard Fast Ethernet cabling and transceivers. During storage, the electronics can withstand temperatures from -40 °C to +85 °C, helping protect the terminal during transportation or storage in unconditioned warehouses.
