EL6070-1469 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Beckhoff EL6070-1469 is part of the EL EtherCAT Terminals series and features a polycarbonate housing with an IP20 protection class. It mounts on a 35 mm DIN rail and offers a local memory of 1 MByte. With enhanced load capacity, this terminal supports a typical E-bus current of 120 mA and has a power contact load of 10 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EL6070-1469 is an EtherCAT interface terminal produced by Beckhoff and supplied within the EL EtherCAT Terminals series. The module functions as a programmable storage node inside an I/O strand, giving the controller rapid access to retained parameters, device descriptions, or application code. When inserted beside standard signal terminals, it eliminates separate flash cards and wiring, streamlining cabinet layouts in distributed automation systems that depend on quick module replacement cycles. Because the physical format matches neighboring EL terminals, installation requires no special brackets or tools.
All operating power is drawn through the EtherCAT backplane; the terminal’s electronics require only 120 mA from the E-bus, so no auxiliary supply lines are needed. A non-volatile buffer of 1 MByte is available for retaining PLC projects or update files, allowing data to be loaded locally even when upstream communication is offline. Time-sensitive synchronization is not required because the terminal does not support Distributed Clocks, which keeps network setup straightforward. Mechanical attachment uses a 35 mm DIN rail (EN 60715), and the exposed surfaces meet the IP20 ingress rating for protected enclosures. For electromagnetic compatibility, the design conforms to EN 61000-6-2/EN 61000-6-4, limiting conducted and radiated emissions in industrial areas.
The power feed-through contacts are rated for currents up to 10 A, allowing the terminal row to pass substantial field supply without separate distribution blocks. Its enclosure is molded from Polycarbonate, which provides electrical insulation while keeping the overall weight low for dense rail sections. The permitted installation position is Variable, so the terminal can be mounted horizontally or vertically to suit panel layout constraints. Shock and vibration resistance follows EN 60068-2-6/EN 60068-2-27, helping the unit remain mechanically stable on mobile equipment or presses where continuous acceleration is present. An internal circuit supports enhanced load capacity for demanding I/O clusters.
Frequently Asked Questions about EL6070-1469:
Q: How much local memory does the EL6070-1469 provide?
A: The EL6070-1469 terminal offers 1 MByte of local memory.
Q: Does the EL6070-1469 support enhanced load capacity?
A: This terminal features enhanced load capacity, making it suitable for higher electrical loads.
Q: What is the typical E-bus current for the EL6070-1469?
A: The current drawn from the E-bus in this terminal is typically 120 mA.
Q: How is the EL6070-1469 terminal mounted?
A: The EL6070-1469 is designed to be mounted on a 35 mm DIN rail following the EN 60715 standard.
Q: What protection class does the EL6070-1469 terminal have?
A: The protection class for the EL6070-1469 terminal is rated at IP20.
