EL3154 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
MPN: EL3154-0000
The EL3154 from Beckhoff is part of the EL EtherCAT Terminals series and features four 16-bit analog inputs with single-ended ground reference. Designed for mounting on a 35 mm rail, it has a dielectric strength of up to 30 V and an input filter limit of 5 kHz. It uses E-Bus electronics supply, supports up to 95% relative humidity, and is rated IP20 for protection.
Internal Product Review
The EL3154 is a Beckhoff EtherCAT analog input terminal with 4 analog inputs and 16-bit resolution. Distributed clocks support and a 5 kHz input filter limit give signal acquisition a precise, responsive character in fast control architectures. IP20 protection makes this terminal a strong choice for clean cabinet installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EL3154 is an analog input terminal produced by Beckhoff within the EL EtherCAT Terminals series. It accepts voltage signals from field sensors and converts them into digital data for an EtherCAT controller. This function allows centralized PLCs to monitor process variables such as pressure, position, or temperature without requiring separate analog modules near every sensing point.
Each of the four channels shares a single-ended ground and is scanned through a multiplex architecture, so only one converter is required for all inputs, reducing heat and space requirements. The conversion resolution reaches 16 bits, enabling the detection of small signal changes over the ±10 V span. Sample data are transferred to the bus as 4 × 16-bit words inside the input process image, while a separate status image of 4 × 8 bits provides diagnostics for each channel. Upstream synchronization is handled by Distributed Clocks, allowing the terminal to participate in deterministic network sampling. Signal conditioning includes a 5 kHz input filter that removes high-frequency noise before quantization, and channel-to-ground dielectric strength is rated at 30 V to withstand typical field transients. Power for the measurement electronics is drawn from the E-Bus, eliminating the need for an external auxiliary supply. Nonvolatile storage support keeps configuration data intact after power cycling.
For physical integration, the terminal clips onto a 35 mm DIN rail and draws only 40 mA from the signal contacts, allowing dense I/O islands without overloading the backplane. Its housing has an IP20 protection rating, so the terminal must be installed inside a control cabinet but provides finger-safe wiring once installed. Operation is permitted from 0 °C to 55 °C and at up to 95% relative humidity without condensation, supporting use in typical machine rooms. The compact rail-mounted housing allows the terminal to be placed alongside other EtherCAT terminals in cabinet-level control systems without requiring a separate enclosure.
