EL2008-0015 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff EL2008-0015 is part of the EL EtherCAT Terminals series and features eight non-reactive outputs, each capable of switching up to 0.5 Amps. It supports variable installation positions, accommodates ohmic, inductive, and lamp loads, and provides 24 VDC nominal output voltage. This device offers IP20 protection and reverse polarity protection, with a maximum switch-off energy of 150 millijoules per channel.
Internal Product Review
The EL2008-0015 is a Beckhoff EtherCAT output terminal with 8 outputs and a 24 VDC nominal output voltage. Support for ohmic, inductive, and lamp loads with 0.5 A per channel delivers strong flexibility for machine I/O. IP20 protection makes the terminal a solid choice for dependable cabinet-level integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EL2008-0015 is a digital output terminal produced by Beckhoff within the EL EtherCAT Terminals series. Integrated into an EtherCAT I/O strand, the module delivers switching commands from the fieldbus controller to discrete loads in machinery and process equipment. Its transistor channels allow the PLC to energize solenoids, signal lamps, or contactor coils without additional relay accessories, making the unit a compact interface between low-level control logic and low-voltage actuation circuits.
The terminal distributes a nominal output of 24 VDC to each channel, matching the standard control voltage used in most industrial panels. The terminal has 8 individually addressable outputs, and each channel can deliver up to 0.5 A. Resistive or inductive devices drawing within this current limit can therefore be driven directly. The housing carries a protection rating of IP20, indicating finger-safe terminals but no protection against water, so the terminal is intended for installation inside an enclosure. When an inductive load is de-energized, the switch-off energy is limited to 150 mJ maximum per channel; an external suppressor should be added if the stored energy exceeds this limit.
The process image presented to the controller occupies 8 output bits, so each logical bit maps to one physical transistor without data padding. The terminal supports a variable mounting orientation, allowing it to be installed horizontally or vertically on a DIN rail. Continuous operation is permitted at up to 95% relative humidity, provided condensation is avoided, which supports use in humid production areas. Internal electronics are supplied via the E-Bus, so the logic circuitry does not require a separate field supply. The outputs are non-reactive, and integrated reverse-polarity protection helps prevent accidental wiring errors from damaging the terminal.
