EL1862 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
MPN: EL1862-0000
The Beckhoff EL1862 is part of the EL EtherCAT Terminals series and features 16 digital inputs. It operates at a nominal input voltage of 24 VDC and offers a typical input current of 3 mA. The terminal connects using a 2 x 10-pin male connector conforming to IEC 60603-13 and provides IP20 protection class.
Internal Product Review
The EL1862 is a Beckhoff EtherCAT terminal designed for 16 digital inputs at 24 VDC. From a controls standpoint, EN 61131-2 Type 1/3 input behavior and a typical 3 ms input filter support stable signal acquisition in standard automation panels. Variable installation position and IP20 protection make this terminal a dependable choice for clean cabinet installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EL1862 is a digital input terminal produced by Beckhoff for the EL EtherCAT Terminals series. Intended for machine tools, conveyors, and process skids, the module collects parallel 24 V sensor signals and places them onto the EtherCAT process data stream so a PLC can react in real time. By concentrating sixteen channels in one housing, the unit increases I/O density on a DIN rail and eliminates the need for separate fieldbus couplers on small control panels.
The terminal operates at a nominal field level of 24 VDC and makes all signals available across 16 discrete input lines. Each line draws only 3 mA, and the circuitry applies a typical debounce time of 3 ms so relay chatter does not reach the controller. Internal electronics are powered by the sensor supply and consume just 4 mA, minimizing heat inside crowded enclosures. Inputs comply with EN 61131-2 Type 1/3, ensuring compatibility with sourcing or sinking devices found in industrial cabinets. Field wiring is organized through a flat ribbon cable that terminates on a 2 × 10-pin male header built to IEC 60603-13. This connector format allows conductors to be connected or disconnected as a group without handling individual wires. Sixteen status LEDs sit above the contacts to indicate signal presence on every channel.
An EtherCAT backplane supplies the logic with 100 mA of E-bus current, so no auxiliary feed is necessary when the terminal is plugged into an existing station. The housing carries a protection rating of IP20, making it suitable for clean control cabinets, and it snaps onto a 35 mm mounting rail with spring clips. Because the installation position is variable, the terminal can be placed horizontally or vertically to fit the available space. During operation, it delivers exactly 16 input bits to the process image, giving the controller a one-to-one representation of every wired sensor.
