CX9010-1102 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The CX9010-1102 is an embedded PC manufactured by Beckhoff as part of the CX Embedded PC Systems series. It features an Intel IXP420 processor with a 533 MHz clock rate, 128 MB RAM, and runs Microsoft Windows CE. The unit includes 2 LAN ports, 2 USB 2.0 ports, and 32 MB of flash memory, operating on a 24 V DC supply voltage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CX9010-1102 is an embedded PC manufactured by Beckhoff in the CX Embedded PC Systems series. Installed on a DIN rail beside modular terminals, it replaces traditional PLC hardware by integrating computation, networking, and fieldbus coupling in one compact housing. It serves as the central platform for machine sequencing, motion interpolation, and data exchange while keeping control hardware compact.
It uses a 533 MHz clock generated by the Intel IXP420 processor, which is sufficient for deterministic PLC cycles and real-time fieldbus routing. Working data reside in 128 MByte RAM, while the operating image and user program are stored in a soldered 32 MByte flash device that tolerates vibration better than removable media. Network access is provided through two RJ45 ports that support 10/100 Mbit/s operation and can run in switch or separate subnet mode, and a DVI-I connector can link directly to a touch panel or remote monitor. The K-Bus interface can connect up to 256 I/O terminals without an additional coupler. Even under full load, the controller dissipates only 6.5 W, so passive convection cooling inside a sealed cabinet is usually sufficient.
The preinstalled Microsoft Windows CE platform hosts the TwinCAT runtime configured for PLC + NC, allowing synchronized axis control and standard IEC 61131-3 logic to run on the same CPU. All electronics draw from a single 24 V DC supply, and an internal switch converts this line for the 2 A I/O bus that powers the attached terminals. Retentive process values are secured in 128 kB NOVRAM, and high-speed handshakes with the fieldbus master use a dedicated 4 kB dual-port RAM. The fanless construction eliminates moving parts, and overall boot time is reduced because the operating system, NOVRAM contents, and dual-port buffer are mapped directly into local memory during startup.
