CX9010-0101 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Beckhoff CX9010-0101 is part of the CX Embedded PC Systems series and features an Intel IXP420 processor with XScale Technology, operating at a clock rate of 533 MHz. It includes 128 megabytes of RAM, 32 megabytes of flash memory, and supports 2 USB 2.0 ports as well as 2 Ethernet interfaces. The device runs on a 24 VDC power supply with a maximum power loss of 6.5 watts and has an IP20 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CX9010-0101 is an embedded PC controller manufactured by Beckhoff within the CX Embedded PC Systems series. It combines a 24 VDC supply slice with an E-Bus backplane so that EtherCAT terminals dock directly to the CPU segment. In machine cells the device acts as a PLC, motion coordinator, and field-bus gateway, delivering deterministic control where a full industrial PC is impractical. Its firmware includes the TwinCAT-CE-PLC-Runtime for executing IEC 61131-3 tasks under Windows CE.
At the core of the unit is an Intel IXP420 processor running at 533 MHz; this ARM-based chip supports hard real-time PLC cycles. The CPU pairs with 128 MByte of SDRAM for dynamic data and a 32 MByte flash device that holds the OS and user program after power loss. A 128 kByte NOVRAM safeguards retentive variables. Internal dissipation is limited to 6.5 W, permitting fan-less cabinet mounting. An I/O backplane feed of 2 A supplies attached EtherCAT slices.
I/O and communication resources are concentrated on the front panel. Two 2 x RJ45 10/100 Mbit/s ports form an Ethernet switch for programming, SCADA links, or direct EtherCAT broadcast. A single DVI-I 29-pin connector drives touch or maintenance displays, while two USB 2.0 sockets provide up to 100 mA each for service dongles or wireless adapters. The entire assembly is powered from a 24 VDC source and withstands a dielectric test of 500 Vrms between power and signal circuits. Environmental sealing is defined by the IP20 protection class, so the controller is intended for mounting in a closed control cabinet. The Terminal Bus implemented as an E-Bus automatically propagates clocks and data to EtherCAT terminals, and the integrated TwinCAT runtime synchronizes their process images with the field each cycle.
Frequently Asked Questions about CX9010-0101:
Q: What processor and clock speed are featured in the CX9010-0101 Embedded PC?
A: The CX9010-0101 uses an Intel IXP420 processor with XScale Technology running at a clock rate of 533 MHz.
Q: How many Ethernet interfaces are available on the CX9010-0101 and what are their speeds?
A: This model provides 2 Ethernet interfaces, each with RJ45 connectors supporting 10/100 Mbit/s.
Q: How many USB ports does the CX9010-0101 offer and what is the current per port?
A: The CX9010-0101 includes 2 USB 2.0 ports with a current supply of 100 mA per port.
Q: What type of video output port is included on the CX9010-0101?
A: A single DVI-I (29-pin) port is available on this device for video output.
Q: What is the required power supply voltage and maximum power loss for the CX9010-0101?
A: It operates with a 24 VDC power supply and has a maximum power loss of 6.5 W.
