AL2024-0000-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AL2024-0000-0000 belongs to the AL Linear Motors series and features a peak force of 1800 Newtons with a continuous force of 800 Newtons using air cooling. This linear servo motor has 24 coils, a coil unit weight of 5.2 kg, and operates with a continuous current of 8.60 Amps. It has a motor constant of 1520 Newton squared per Watt, magnetic attraction force of 3400 Newtons, and a width of 80 mm.
Internal Product Review
The AL2024-0000-0000 is a Beckhoff linear servo motor with normal winding and a 24-coil configuration. Air-cooled continuous force of 800 N and peak force of 1800 N give the unit strong thrust capability for demanding positioning tasks. A low thermal resistance of 0.12 °C/W supports stable heat management, making the AL2024-0000-0000 a strong performer in linear motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AL2024-0000-0000 coil segment belongs to the AL Linear Motors series produced by Beckhoff. Designed for direct-drive positioning, the component generates thrust along a fixed magnet rail so that automated pick-and-place arms, packaging lines, or measuring stages can accelerate loads without belts or screws. It is classified as a linear servo motor and is supplied as a bare coil unit measuring 80 mm across. The unit can be installed in a machine frame where a compatible magnetic plate and Hall sensors complete the axis.
During continuous operation with forced-air cooling, the winding supports a drive current of 8.60 A and produces a sustained thrust of 800 N. Its copper and iron stack dissipates 600 W of power loss into the ambient airflow. Short demand peaks can raise the output to 1800 N, allowing rapid indexing or tight control-loop corrections before thermal limits are reached. The motor constant is 1520 N²/W, indicating the relationship between generated force and electrical power loss. Excess heat travels through the laminated core toward the surface with a thermal resistance of 0.12 °C/W. Twenty-four individually impregnated coils form the phase set, and the assembly weighs 5.2 kg. The unit uses a standard normal winding, and its supply leads are flying cables without connectors.
The thermal mass provides a time constant of 77 s, so step changes in load or duty cycle produce a gradual rise toward a steady operating temperature. Electromechanical clearance is maintained by an air gap of 0.5 mm between the coil face and the magnet track. The mover is pulled toward the platen by a magnetic attraction force of 3400 N, which must be considered when selecting bearings and support components. Operation is permitted at humidity levels up to 95% RH, allowing use in humid production areas when the surrounding equipment provides suitable protection. The magnet plate adds 3.8 kg for each meter of travel. Water cooling is not provided, so the installation must use the stated forced-air cooling arrangement for continuous operation.
