Product Description:

The X67CA0P20.0100 field cable is produced by B&R Automation for use with the X67 Analog Input Output Modules series. This component serves as a dedicated supply and signal line between rugged IP67 I/O blocks and peripheral devices in automated machinery. It combines power conductors and analog channels in one molded assembly so that distributed modules can be connected across conveyors, packaging machines, and other motion axes without custom wiring. This arrangement supports machine layouts where field devices must be placed away from the control cabinet while still using a single preassembled cable.

The cable uses a conductor array of 4x 0.5 mm², giving equal cross-section for the two power and two signal cores. The assembly is delivered in a factory-terminated length of 10 m, allowing placement of remote modules across long machine frames without intermediate junctions. Because the bundle is not shielded, electromagnetic compatibility depends on proper routing rather than foil or braid, which helps keep the cable diameter small. Current-carrying strands follow Class 6 flexibility, meaning fine wires are grouped for repeated movement. External protection is provided by a Polyurethane (PUR) jacket that resists oils, coolants, and abrasion common on processing lines.

Electrical parameters confirm suitability for low-voltage analog circuits. The conductor loop resistance is limited to 57 Ω/km, which helps keep voltage drop low over the specified distance while still permitting the fine-strand layout. The cable is rated for up to 60 V AC or DC between cores, matching the extra-low-voltage classification of the X67 family. Dynamic applications such as pick-and-place arms are covered by a service life of 5 million flex cycles when the cable is bent to the stated limits. Insulation resistance is at least 100 MΩ, which helps prevent leakage in humid production areas and supports stable analog signal transmission.