X20SO2120 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation X20SO2120 is part of the X20 Fieldbus Input Output Modules series and includes 2 digital outputs with safe type A output. This module features current monitoring, a rated output voltage of 24 VDC, and a rated output current of 2 A. It is designed for operation at elevations up to 2000 meters and has an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The X20SO2120 is a safety-oriented output module produced by B&R Automation for the X20 Fieldbus Input/Output Modules series. Installed on an X20 bus coupler, this device provides two individually switchable output channels that let a safety PLC disconnect or energize actuators in response to machine states. Its role in industrial automation is to translate logic commands into galvanically isolated power paths that support functional safety while sharing diagnostic data across the fieldbus network.
The module delivers a rated output voltage of 24 VDC, which matches the standard control voltage used in most cabinets. Each channel can source up to 2 A, so drives, valves, or contactors receive adequate current without auxiliary relays. The module has 2 digital outputs arranged as a redundant pair, and the outputs follow the Safe Type A classification, meaning shutoff is achieved through internal semiconductor elements. To limit unsafe dwell time after a fault, the off-state signal switching device reacts in less than 500 µs. Current monitoring is active on every channel, so short circuits or overloads are reported immediately to the controller. An enclosure rating of IP20 indicates that the electronics are protected against accidental finger contact, but the module must be mounted inside a panel that provides additional protection from surrounding conditions.
The unit remains operational at up to 95% RH under noncondensing conditions and at site elevations not exceeding 2000 m, making it suitable for most plant floors without special climate control. It withstands shocks of up to 15 g during operation in machinery subject to rapid deceleration, while vibration endurance of 1 g covers typical motor-borne oscillations. Overvoltage Category II insulation distances help the module tolerate transient spikes when the 24 V supply is routed through secondary circuits. Built-in self-tests work with the bus firmware to identify detected internal faults and report them to the safety controller. This diagnostic process allows the controller to respond to channel errors without relying solely on external monitoring devices.
