X20IF10E1-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The X20IF10E1-1 is a fieldbus input output module manufactured by B & R Automation as part of their X20 Fieldbus Input Output Modules series. It operates as a controller master using PROFINET IO protocol and has a single interface. The module is rated for IP20 protection, consumes 2 watts of power, and withstands up to 15 g shock and 1 g vibration.
Internal Product Review
The X20IF10E1-1 is a B & R Automation fieldbus input/output module designed for PROFINET IO with controller (master) functionality. Technical performance is efficient and cabinet-friendly, with 2 W power consumption and IP20 protection for standard industrial installations. DTM-based configuration supports straightforward commissioning, making this module a strong choice for dependable PROFINET control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The X20IF10E1-1 is a fieldbus interface module produced by B&R Automation as part of the X20 Fieldbus Input Output Modules series. Installed on the X20 backplane, it provides the network access point for distributed I/O slices and links them to the higher-level controller. Within industrial automation architectures, the module serves as the communication bridge that manages cyclic data exchange, diagnostic messaging, and parameter transfer between the machine controller and decentralized devices. This arrangement lets remote input and output points exchange data without direct point-to-point wiring back to the control cabinet.
The module offers a single network interface, allowing deterministic traffic to pass through one physical connector. It uses the PROFINET IO protocol and operates in the controller role, so it manages data exchange with subordinate devices on the network. Average power draw is only 2 W, which simplifies thermal planning inside densely populated cabinets. When mounted horizontally, the electronics tolerate ambient temperatures up to 60 °C, and convection cooling is sufficient at that limit. Reliable operation is supported up to 2000 m above sea level and in atmospheres with relative humidity as high as 95%.
In vertical mounting, the maximum ambient temperature drops to 50 °C, and the module starts reliably down to -25 °C for use in cold operating areas. Protection class IP20 restricts installation to enclosures where no conductive dust can reach energized parts, while overvoltage category II suits distribution-level supplies. The housing withstands shock loads of 15 g and vibrations up to 1 g without loss of communication. Configuration is carried out through a DTM object, which allows parameter access from standard engineering tools. The conformal design requires non-condensing conditions, so site air must remain free of moisture droplets.
