X20IF1043-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation X20IF1043-1 is part of the X20 Fieldbus Input Output Modules series and supports the CANopen fieldbus protocol with a single interface. It features a protection rating of IP20, operates as a network slave, and requires 1.1 W bus power. The module endures shock resistance up to 15 g and operates in ambient temperatures ranging from -25°C to 60°C horizontally and up to 2000 meters elevation.
Internal Product Review
The X20IF1043-1 is a B & R Automation fieldbus input/output module designed for CANopen slave communication. IP20 protection and a 1.1 W bus power requirement support efficient panel integration with low power demand. A temperature range from -25°C to 60°C adds valuable operating flexibility for industrial control assemblies.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The X20IF1043-1 is an I/O communication module manufactured by B & R Automation and supplied within the X20 Fieldbus Input Output Modules series. Installed on an X20 slice backplane, it establishes a fieldbus link between distributed sensors, actuators, and the central controller, allowing precise signal collection and command issuance in industrial automation cells. Its compact slice format allows it to sit alongside neighboring X20 modules without requiring a separate standalone gateway. This arrangement helps keep machine I/O layouts modular when field devices are distributed across a control panel.
This module communicates through the CANopen protocol and draws only 1.1 W from the backplane bus, which limits heat generation inside compact cabinets. A single back-panel connector provides 1 interface, keeping the network layout straightforward and wiring predictable. The device operates as a Slave, so cyclic data exchange is initiated by the network master rather than by the module itself. It also supports engineering tools through its DTM configuration feature, allowing parameter sets to be edited directly from an FDT frame application. Twelve gold-plated terminal pins route the fieldbus, power, and reference signals between neighboring slices, and the assembly is certified for overvoltage category II installations where transients remain within distribution-level limits.
In the horizontal mounting position, the module operates at temperatures up to 60 °C, while vertical mounting is limited to 50 °C and low-temperature operation is maintained down to -25 °C. Within its IP20 enclosure, conformal-coated electronics withstand 95% relative humidity and elevations reaching 2000 m without derating. Mechanical endurance is verified for vibration forces of 1 g and shock loads up to 15 g, so the slice remains securely seated on its DIN rail carrier during transport and service motion. These operating limits make the module suitable for installation inside enclosed electrical cabinets used in automated production equipment.
