X20DC1196
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The X20DC1196 module operates at a nominal voltage of 24 VDC and features electronic protection with automatic restart. Manufactured by B & R Automation under the X20 Fieldbus Input Output Modules series, it weighs 200 grams and supports DIN rail mounting. It offers reverse polarity and short-circuit protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The X20DC1196 is a state-of-the-art digital counter module designed by B &R Automation to improve communication in industrial automation systems. This unit is built according to international standards; it provides a smart and safe way for operators to handle digital signals without directly interfering with industrial production processes. The housing of this module is covered with a protective coating that prevents interference from condensation and corrosive gases. There is an ABR incremental encoder signal interface present in this unit, this interface allows for the quick detection of position and angular changes in the ABR encoder, which is widely used in servo systems. The X20DC1196 features a digital status indicator that is connected to the power supply unit and provides information about operating status and the module status.
The internal input and output unit of the X20DC1196 consumes about 1.5 kilowatts of electrical power, about 0.01 watts is also consumed at the bus connector. Only properly shielded signal lines should be used with this product, as this will significantly reduce electrical interference during operation. The X20DC1196 operates with a 3-wire connection type; its input resistance is also estimated to be about 7.19 kiloohms. A home enable switch is also provided as an additional function on the module.
The X20DC1196 is able to withstand a wide temperature range, during its operation, ambient temperature levels should be maintained between -25 to about 60 degrees Celsius. If the module is mounted vertically, ambient temperature should not exceed 50 degrees Celsius. Humidity levels for this product should be between 5 and 95 per cent, and water condensation should also be avoided. Installation of this product should be maintained between 0 to 2000 meters, if the installation height exceeds 2000 meters, operators are required to reduce ambient temperature around the unit by 0.5 degrees for every 100 meters increase in height.
Frequently Asked Questions about X20DC1196:
Q: What type of encoder interface does the X20DC1196 have?
A: The X20DC1196 is equipped with an ABR incremental encoder interface. The encoder input is a 5-volt symmetrical input.
Q: What connection type is compatible with the digital input of the X20DC1196?
A: The digital inputs on the X20DC1196 requires a 3-wire connection.
Q: Which installation orientation is recommended for the X20DC1196?
A: The X20DC1196 can be installed vertically or horizontally without problem.
Q: Is the operation of the X20DC1196 affected by temperature?
A: The best operation temperature for the X20DC1196 is between -25 to about 60 degrees Celsius.
Q: Can the X20DC1196 be installed at any height?
A: The maximum installation height for the X20DC1196 without derating is about 2000 meters above sea level.
