X20CA0E61.02000 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation X20CA0E61.02000 is part of the X20 Fieldbus Input Output Modules series and features an RJ45 to RJ45 connector type. The cable has a cross-section of 4x 2x 0.14 mm², a conductor design of 26/7 AWG, and is rated for an operating voltage of 125 V. Its outer jacket is made of black PVC, provides 85% shield coverage, and the wire insulation is made of polyethylene.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B&R Automation's X20 Fieldbus Input Output Modules series includes connection components such as the X20CA0E61.02000. This part is a preassembled RJ45-to-RJ45 cable that links fieldbus nodes or bridges the modular I/O system to higher-level controllers. By providing consistent electrical characteristics and compact dimensions, the product helps maintain signal integrity across distributed machine sections and simplifies installation in industrial enclosures. Because both ends are factory terminated, it can be installed quickly where modular nodes are arranged in rows or across separated cabinet sections.
The cable core arrangement follows a cross-section of 4 x 2 x 0.14 mm², meaning four twisted pairs with 0.14 mm² conductors that balance current capacity with flexibility for tight routing. An overall outer diameter of 6.7 mm ±0.2 mm sets the space required in wire ducts, and the cable should be routed with a fixed bend radius of at least four times that dimension to help avoid conductor fatigue. Rated insulation withstands up to 125 V, so the assembly safely carries the extra-low voltages found on Ethernet-based fieldbuses. Compliance with Category 5 transmission performance supports the attenuation and crosstalk limits needed for 100 Mbit/s links, while a braid and foil combination provides 85% shield coverage to suppress electromagnetic interference from servo drives and inverters.
Signal quality is also affected by the strand geometry of 26/7 AWG, which provides a practical balance between electrical resistance and flexibility during routing. Direct current resistance remains within ≤145 Ω/km at 20 °C, limiting voltage drop over longer machine runs, and the polyethylene insulation offers ≥5 GΩ/km at 20 °C of insulation resistance to reduce leakage between pairs. With a mass of only 0.058 kg/m, the cable adds little weight to cable trays and moving harnesses. The black PVC jacket, the stated length tolerance of +1%, and the RJ45 connectors support orderly installation without additional on-site terminations.
