X20AI2632-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The X20AI2632-1 is a six-input current module with a signal range of 0 to 20 mA or 4 to 20 mA. Manufactured by B & R Automation, it is part of the X20 Fieldbus Input Output Modules series and features a resolution of 16 bits. The module is rated at IP20 protection and operates on 24 V DC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The X20AI2632-1 Input Output Module is designed by B & R Automation for high precision signal acquisition in demanding automation environments which features a ±15-bit resolution analog-to-digital converter that can detect minute variations in voltage across a wide input range.
The X20AI2632-1 module can accept signals from two separate analog sources in which each channel is capable of interpreting either a voltage signal that swings from minus 11 volts to plus 11 volts or a current signal ranging anywhere between 0 and 22 mA. It comes with visual indicators such as LEDs, that are provided for each channel to show what function it's performing and it has additional lights which display whether the module is active and its health state. It also features built in diagnostic functions which allow the system to monitor the health and behavior of the module and it can detect whether it is operating normally, if there is a fault in the analog input readings or if the configuration for a channel doesn’t match expected settings. The amount of electrical energy drawn from the backplane bus for internal operations is extremely low which is just 0.01 watt which allows for energy efficient operation and reduces heat generation.
This X20AI2632-1 module has two input signal types such as ±11 V voltage and 0 to 22 mA current that are wired differently and the hardware provides separate terminals or pin configurations for each type to ensure accurate measurement and eliminate wiring mistakes. In this module each analog input is measured between two signal lines rather than using a single-ended reference which enhances noise immunity and is particularly useful in environments with electrical interference or applications that involve extended cable lengths.
Frequently Asked Questions about X20AI2632-1:
Q: Why does the X20AI2632-1 use differential inputs instead of single-ended inputs?
A: Differential inputs reduce susceptibility to electrical noise and interference. This design is especially beneficial in environments with long cable runs or high EMI.
Q: How does the 20 MΩ input impedance benefit analog signal measurement?
A: The high impedance ensures minimal load on the source signal. It allows accurate readings without affecting the signal quality from sensitive equipment.
Q: What is the purpose of using separate terminals for voltage and current signals?
A: It prevents wiring errors and protects internal circuits. This design ensures that each signal type is accurately routed and processed.
Q: Why is electrical isolation important in the X20AI2632-1 module?
A: Electrical isolation protects both the I/O module and the control system from potential faults. It also helps maintain signal integrity by preventing ground loops.
Q: How does the 50 µs conversion time affect real-time applications?
A: It enables fast and synchronous data acquisition across both channels. This is critical in systems requiring immediate response based on sensor input.
