2AT610.6/Z B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
14 Seconds
The B & R Automation 2AT610.6/Z controller is part of the System 2010 Controllers series and features 16 differential inputs with four channel groups. It offers an allowed input signal range of -20 to +20 V, supports sensor types L, J, and K, and has a resolution greater than 14 bits. The controller has a cutoff frequency of 8 Hz and can be used to measure temperatures from -200 to +1300 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AT610.6/Z is an analog input module produced by B&R Automation for the System 2010 Controllers series. It provides 16 differential channels to the controller rack, allowing process equipment to feed low-level signals directly into the automation system. The module converts thermocouple and millivolt inputs into digital data so that temperature and small-signal measurements can be supervised and logged within industrial machinery.
The module accepts an input window of -20 to +20 V, which helps protect the converter electronics against overrange wiring faults, while the measurement span for process data is a nominal range of -15 to +55 mV. A high input resistance greater than 1 MΩ minimizes loading on connected sensors. The basic accuracy is ±25 µV, limiting the maximum instantaneous error contributed by the front end. Before conversion, signals pass through a second-order Bessel low-pass network with a cutoff of 8 Hz, which helps keep aliasing under control. Conversion is performed at user-selectable cycle times of 20 / 16.67 / 10 / 8.33 ms, and the resulting digital value is encoded with a resolution of more than 14 bits for each channel.
Channel management is arranged in four groups that correspond to the allocations 1-4, 5-8, 9-12, and 13-16, letting the controller treat each block independently for synchronized scanning. Long-term stability is supported by an offset drift of ±1.1 µV/°C, and repeatability within ±0.008% helps maintain consistent readings across successive cycles. The board dissipates a maximum of 8 W, so it can operate in compact enclosures without exceeding thermal limits. When equipped with type L, J, or K thermocouples, it covers a measurement span of -200 to +1300 °C, allowing the System 2010 platform to monitor both cryogenic and high-temperature process points on one card.
Frequently Asked Questions about 2AT610.6/Z:
Q: How many differential inputs are available on the B & R Automation 2AT610.6/Z module?
A: The 2AT610.6/Z analog input module features 16 differential input channels for signal acquisition.
Q: What is the allowed input signal range for the 2AT610.6/Z?
A: This module supports input signals in the range of -20 to +20 V.
Q: Which sensor types can be used with the 2AT610.6/Z input module?
A: The 2AT610.6/Z unit is compatible with sensor types L, J, and K.
Q: What is the resolution capability of the 2AT610.6/Z module?
A: The resolution of the 2AT610.6/Z exceeds 14 bits for precise analog measurements.
Q: What is the maximum power consumption of the 2AT610.6/Z module?
A: It offers a maximum power consumption of 8 W during operation.
