7IF361-70 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 7IF361-70 is a communication module in the System 2003 Controllers series. It supports PROFIBUS DP Slave fieldbus with an RS485 bus type and has a max transfer rate of 12 MBit/s. Featuring a 9-pin DSUB socket connector and IP20 protection, it is designed as a screw-in module and consumes 2.6 W of power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 7IF361-70 communication module is manufactured by B & R Automation as part of the System 2003 Controllers series. Installed beside the CPU, this screw-in card equips a controller with a dedicated fieldbus connection so that drives, remote I/O, and operator terminals can exchange cyclic data in real time. By handling telegram traffic independently of the main processor, it helps the automation system maintain deterministic scan times that are critical for coordinated motion and tightly regulated process sequences.
The module uses the balanced signal pair of RS485, a physical layer that supports long cable lengths and high noise immunity found on factory floors. Cable entry is through a rugged 9-pin DSUB socket secured by threaded hardware. The design exposes 1 interface, simplifying address assignment and diagnostics during setup. When the supervising master permits, the interface sustains transfer rates up to 12 MBit/s; this upper limit sets the maximum size and update frequency of the process image that can be moved across the bus. Galvanic isolation between PLC logic and the communication circuit is provided to suppress ground loops and protect sensitive input channels.
At protocol level the card behaves as a PROFIBUS DP Slave, exchanging input and output data blocks according to DP-V0 rules. It draws only 2.6 W, so cumulative heat rise inside compact cabinets remains modest. A front-panel LED labeled Send/Receive Data indicates telegram activity for quick troubleshooting. The housing meets IP20 protection, meaning it must reside in a closed control enclosure to avoid contamination. Mechanical compatibility with backplane slots 1, 2, 3 allows flexible placement alongside CPUs, power supplies, and other option modules.
Frequently Asked Questions about 7IF361-70:
Q: What bus type does the 7IF361-70 module use for communication?
A: The 7IF361-70 communication module uses the RS485 bus type for reliable data communication.
Q: Which fieldbus protocol is supported by the 7IF361-70 module?
A: The 7IF361-70 supports PROFIBUS DP Slave fieldbus protocol for interfacing with automation systems.
Q: What is the maximum transfer rate supported by the 7IF361-70?
A: This module can achieve a maximum transfer rate of 12 MBit/s during data transmission.
Q: What type of connector is used on the 7IF361-70 communication module?
A: The 7IF361-70 features a 9-pin DSUB socket as its connector interface.
Q: What installation options are available for mounting the 7IF361-70 module?
A: This module is designed for screw-in mounting and can be installed in mounting slots 1, 2, or 3.
