7CM411.70-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 7CM411.70-1 belongs to the System 2003 Controllers series and features three 16-bit analog inputs and three 16-bit analog outputs with a ±10 V range. It provides three digital inputs at 24 VDC, two digital outputs at 24 VDC with a rated output current of 0.5 A, and supports an encoder frequency of 50 kHz. This controller also supports one incremental encoder and includes two event counters.
Internal Product Review
The 7CM411.70-1 is a B&R Automation System 2003 controller with 3 analog inputs and 3 analog outputs. A ±10 V analog range and 16-bit resolution give signal processing a precise, stable feel in closed-loop applications. 24 VDC digital outputs and a 0.5 A rated output current make this controller a very capable choice for integrated machine control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 7CM411.70-1 modular I/O processor is produced by B&R Automation as part of the System 2003 Controllers series. It serves as a signal-conditioning and motion-interface module that attaches to a CPU carrier, bringing mixed analog, digital, and encoder channels into the same backplane. By combining three voltage-driven analog inputs, three analog outputs, discrete lines, and counting resources, the unit lets a machine builder read sensors, generate control voltages, and monitor position feedback without separate standalone cards. This arrangement allows several signal types to be handled in one coordinated control platform and helps keep the hardware layout compact.
The analog front end accepts a ±10 V span on each of its three input channels; with 16-bit conversion this yields 65,536 discrete counts so small signal changes are visible to the control task. Command signals are returned through three output channels that duplicate the same ±10 V window, enabling closed-loop drive regulation from the module itself. For discrete sensing, the three digital inputs are designed for 24 VDC field wiring and use a sink topology, meaning field devices supply current to the card rather than drawing it. The analog outputs also use 16-bit resolution to maintain identical step size, which helps the response remain consistent between measured values and generated signals.
Two transistor drivers deliver logic signals to actuators at a nominal 24 VDC and are implemented as a source output circuit, so the module provides current to the load up to a rated limit of 0.5 A per channel. A single incremental encoder interface supports frequencies to 50 kHz, permitting accurate position capture for rapid feed axes, while 2 event counters can be assigned to length or piece counting tasks without burdening the processor. The combined analog, digital, and encoder functions support synchronized handling of sensing, actuation, and motion feedback in compact automation systems. This layout also reduces the need for additional interface modules when several signal types must be processed within the same rack.
