8YF1I01.BA2B.00-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 8YF1I01.BA2B.00-1 is a part of the ACOPOStrak Systems by B & R Automation. This unit runs with a maximum input voltage of 58 VDC and a peak input current of 31 Amps. It features a protection rating of IP65 and weighs 9.6 kilograms, with dimensions of 446 mm width, 85.5 mm height, and 132 mm depth.
Internal Product Review
The 8YF1I01.BA2B.00-1 is a well-engineered ACOPOStrak system module with IP65 protection and a 100 Mbit/s transfer rate. A 40 kHz switching frequency and 31 A maximum input current support stable, responsive operation in demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B&R Automation manufactures the 8YF1I01.BA2B.00-1 module for the ACOPOStrak Systems series. This component is mounted within a motorized track segment to condition DC power and provide switching signals that propel shuttles along the rail. Within an automation cell, it links the track’s supply network to the control electronics, enabling high-speed, independently commanded transport of workpieces.
The input stage accepts up to 58 VDC, so the device can be connected directly to low-voltage power buses used in safety-rated machinery. Under peak load, it draws a maximum current of 31 A, which determines the required capacity of upstream fuses and conductor cross sections. Energy storage on the DC link is provided by a capacitance of 0.95 mF ±20%, which stabilizes voltage during rapid switching events. The inverter section chops the bus at a switching frequency of 40 kHz, reducing acoustic noise and allowing fine current control for the linear motor segments. Internal electronics and semiconductor losses contribute up to 30 W of power dissipation, which must be removed through the track’s aluminum housing.
The housing has a degree of protection rated at IP65, permitting washdown without water ingress when the coupling blocks are sealed. Real-time coordination with neighboring modules is exchanged over an Ethernet connection operating at a transfer rate of 100 Mbit/s. The compact assembly measures 446 mm in width, 132 mm in depth, and 85.5 mm in height, while its weight of 9.6 kg supports overhead mounting on the track frame. Reliable operation is maintained at installation elevations up to 4000 m. Motion can be enabled through a 24 V control line that permits up to 30 V without damaging the logic circuitry. A PWM off-delay of 42 ms provides time for the output stages to discharge safely after the enable signal is removed.
