8F1CU0001.313U0-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8F1CU0001.313U0-0 is part of the ACOPOStrak Systems series and features a 1 meter display cable. This cable provides a straight, A-coded M12 male connector with 12 pins and a single USB male connector, and supports connection via segment port X2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8F1CU0001.313U0-0 cable assembly is supplied by B&R Automation for use within the ACOPOStrak Systems series of modular transport solutions. It serves as a dedicated link between a mover segment and a panel-mounted operator display, allowing both power and data to pass through a single molded cable. By integrating this preterminated cord set, installers can maintain signal integrity while reducing on-site wiring time in high-speed production cells. The molded terminations also provide consistent connector alignment where repeated machine movement or vibration could place stress on field-wired connections.
This assembly has a 1 m length from connector face to connector face, so it is intended for short jumper runs inside an enclosure or along a track section. Its display cable jacket uses insulation and shielding selected to protect video or touch-panel signals from surrounding electrical noise. On the field end, the round M12 plug uses A-coded M12 keying, which prevents accidental mating with power or sensor connectors that use different coding profiles. The plug has a straight orientation, allowing a predictable bend radius that simplifies routing through conduit or cable chains. The connector has a 12-pin layout that supports simultaneous power, backlight, and USB signaling without additional adapters. This compact arrangement reduces the number of separate cable paths required between the track equipment and the display hardware.
At the controller side, the cord mates with segment port X2, providing a mechanically secure connection that helps protect the contacts against misalignment. Both the M12 and USB terminations are crimped during assembly, and the cable has one connector of each type, preventing daisy-chain loops that could introduce impedance errors. The male USB plug matches the female receptacle on the HMI module for immediate, tool-free installation. The cable is designed for the ACOPOStrak Systems platform, so its conductor mapping follows the platform’s standard pin assignments without requiring custom wiring tables. Its short length also limits excess cable inside compact enclosures, where unnecessary loops could obstruct airflow or interfere with nearby modules.
