8MSC6X.R0-X400-2
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 8MSC6X.R0-X400-2 is a servo motor with a rated power of 400 W and a maximum torque of 3.8 Nm. Manufactured by B & R Automation, it belongs to the 8MS Three Phase Synchronous Motors series and features IP65 protection. This motor has a shaft diameter of 14 mm and comes with a multi-turn absolute encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
8MSC6X.R0-X400-2 is an IP64 rated servo motor. Salient features of B&R 8MS motors include premium NdFeB magnets, three-phase windings, sinusoidal commutation, higher overload capacity, low torque ripple, long operating life, preloaded ball bearings, dual connections, and ACOPOS drive control. Only the bearings on these motors suffer from wear during operation. All other motor parts are maintenance-free. Connection of 8MS synchronous motors to the power mains is not allowed. The motors must get 400 Volts AC power from an ACOPOS drive. The motor surface temperature can reach 100 ⁰C. Therefore, operators must take necessary precautions to prevent accidental contact with the motor surface. Surface cooled motors like the 8MSC6X.R0-X400-2 motor must be installed on the flange, which is the cooling surface. The fan module on this motor requires 230 Volts AC external power.
Power draw of the fan is 18 Watts and its protection class is IP20. The fan has a lifespan that depends on the ambient temperature. Lower ambient temperatures enable higher operating lifespan and higher temperatures lead to a lower lifespan. Operators must ensure that the inlet and outlet of the fan are unobstructed and the heated air at the outlet does not circulate back to the area close to the inlet. A BRX resolver on the motor provides feedback to the ACOPOS drive. The shaft on the 8MSC6X.R0-X400-2 motor is smooth and does not feature an oil seal. A holding brake provides protection from accidental shaft movement. The brake is designed to allow shaft movement after it receives a release signal from the servo drive. Nominal speed rating of the motor is 4500 RPM. The rated motor torque is 13 Nm and the peak output torque is 77 Nm.
Frequently Asked Questions about 8MSC6X.R0-X400-2:
Q: What is the power supply rating of the cooling fan?
A: Power supply rating of the fan is 230 Volts AC.
Q: What is the protection rating of the fan?
A: Protection rating of the fan is IP20.
Q: What is the thermal time constant?
A: Thermal time constant of the motor is 60 minutes.
Q: What is the peak motor speed?
A: The peak motor speed is 6000 RPM.
Q: What is the motor torque constant?
A: The torque constant is 1.6 Nm/A.
