8MSA4L.E3-D30C

Product Description:

The 8MSA4L.E3-D30C motor shows up in the 8MS Three Phase Synchronous Motors series made by B & R Automation. Coming with a flange mount, this motor fits where steady placement is needed and sits strong because of its setup. Rated power hits 400 W, enough for conveyor lines and general drive jobs, while a rated torque of 1.27 Nm handles the push in most moderate machine spots. The rated speed clocks at 3000 RPM, letting equipment keep a quick but controlled pace. Size is right for modern automation cells, and this motor works quietly below the noise of bigger gear.

Covered with IP65 protection, the housing holds out well against dust and low-pressure spray—so a cleaning shift doesn’t mean worrying about leaking water. The motor tracks feedback with an incremental encoder built in, running 2500 PPR resolution, which helps with more accurate control of stops, starts, and direction switches. Mounting matches up to flange style, which cuts rattling and keeps alignment. Connecting it is handled by a plug connector, making wire jobs quicker and keeping accidental pull-outs unlikely on busy lines. The shaft diameter comes at 14 mm, providing a tight slip for hubs or couplers, and there’s feedback straight from an encoder on the back end, feeding straight to controls.

The cooling setup’s passive—no outside fan—so there’s less dust drawn inside, and maintenance keeps simple. Operating temperature sits between -10°C and +40°C, so cold shops and warm afternoons stay in range. These specs make the 8MSA4L.E3-D30C work in roles like pick-and-place units, light robotics, labelers, or packaging tables. Cable routings are all centered to avoid headaches during install.