8LVA33.B1015D200-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8LVA33.B1015D200-0 is part of the 8LVA Three Phase Synchronous Motors series and features a nominal speed of 1500 rpm. This motor is self-cooling, includes a holding brake with 4.0 Nm torque, and utilizes an EnDat 2.2 inductive encoder system. It has a smooth shaft end and separated encoder and power cable interfaces.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LVA33.B1015D200-0 is a three-phase synchronous servo motor manufactured by B&R Automation as a member of the 8LVA Three Phase Synchronous Motors series. It is also classified within the 8LV Servo Motor product group. The unit has motor size 3 and length code 3, giving it a compact frame that suits space-conscious machine layouts. It converts drive current into controlled rotary motion for packaging, material-handling, and assembly axes. An integrated holding brake secures the connected load during controlled stops or an emergency loss of power.
At its nominal operating point, the rotor reaches 1500 rpm, providing a speed reference for drive tuning and gear selection. Position feedback is delivered by an EnDat sensor with 19/16 bit single-turn and multi-turn resolution. Its multi-turn range covers 65,536 turns, allowing the drive to retain the absolute position across an extended operating range. Absolute accuracy is specified at ±120 arcsec, which corresponds to approximately 0.033 degrees. For vertical or indexing duties, the built-in brake supplies 4.0 Nm of static holding torque. The multi-turn feedback maintains position information through power cycles without requiring external reference switches. The motor does not include functionally safe feedback, so required STO or SIL functions must be provided by the drive and control system.
Thermal management is provided by a self-cooling housing, eliminating the need for fans and simplifying ventilation around the motor. The inductive feedback head uses the EnDat 2.2 Inductive protocol and connects through a separate encoder cable, while the phase conductors use the designated power cable. Both cables connect through a built-in double angular connector that can swivel to support flexible routing within the machine. Mechanical output is delivered through a smooth shaft without a keyway, making it suitable for zero-backlash clamping couplings. Absolute position memory is battery-backed, allowing stored position data to remain available when primary power is removed. The motor is supplied without an oil seal, so the front bearing must be protected from process fluids during installation and operation.
