8LVA23.B1030D100-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LVA23.B1030D100-0 is a three-phase synchronous motor in the 8LVA Three Phase Synchronous Motors series. It operates at a nominal speed of 3000 rpm and features self-cooling, a keyed shaft end, and a built-in double angular connector. The motor is equipped with a separated encoder and power cable interface and uses an EnDat 2.2 inductive encoder system.
Internal Product Review
The 8LVA23.B1030D100-0 is a B & R Automation 8LV servo motor with self-cooling and a keyed shaft. The EnDat 2.2 inductive encoder and 19/16-bit single-turn/multi-turn resolution support precise feedback and dependable motion control. A 3000 rpm nominal speed and 65536-revolution multi-turn capability make this motor especially well suited for accurate positioning duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LVA23.B1030D100-0 is a three-phase synchronous motor produced by B&R Automation within the 8LVA Three Phase Synchronous Motors series. Classified by the manufacturer as part of the 8LV Servo Motor family, the unit serves as a torque source for numerically controlled axes in automated packaging, assembly, and material-handling lines. Its construction supplies constant electromagnetic torque over a wide speed range so machinery can position loads with repeatable precision while remaining compatible with AC drive platforms in the same automation system.
This model reaches a nominal speed of 3000 rpm, which is the continuous mechanical output point used when sizing gear ratios and inverter current limits. Rotor position is detected by an EnDat 2.2 inductive encoder; the feedback system offers an accuracy of ±120 arcsec, allowing tight servo-loop tuning for contouring or indexing duties. Single-turn and multi-turn position values are provided at 19/16 bits, respectively, and absolute position can be maintained for up to 65536 revolutions because the encoder contains a battery-backed memory module. Separate encoder and power cable interfaces simplify harness installation and help isolate electrical noise. With motor size 2 and length code 3, the frame uses moderate installation space while providing enough torque for mid-range load inertias on transfer, indexing, and positioning axes.
The housing is cooled by natural convection, specified simply as self-cooling, so no external blower or coolant circuit is required. Power and feedback lines exit through a built-in double angular connector that can swivel to suit different mounting orientations, which helps in tight machine layouts. Mechanical output is transferred through a keyed shaft, and the encoder retains multi-turn position information so reference moves are not required after power loss. There is no holding brake, no functional safety certification, and no oil seal, so external measures are needed if shaft locking, safety functions, or fluid exclusion are required.
