8LSN56.D0020D600-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSN56.D0020D600-0 is a three-phase synchronous motor that is part of the 8LS Synchronous Motors series. It features a 142 mm mounting flange, self-cooling with increased mass moment of inertia, and a rated speed of 2000 rpm. This motor includes an optical EnDat encoder with single-turn capability and has a smooth shaft end with an angled connection direction.
Internal Product Review
The 8LSN56.D0020D600-0 is a B & R Automation three-phase synchronous motor rated for 2000 rpm. Optical EnDat 2.2 feedback supports precise position data and dependable integration in motion systems. Self-cooling and a smooth shaft make the unit a strong choice for clean, low-maintenance servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B&R Automation manufactures the 8LSN56.D0020D600-0 within its 8LS Synchronous Motors series. The unit integrates into servo axes that require precise position and velocity control in packaging machines, pick-and-place gantries, and other automated stations. Built around a permanent-magnet rotor and a three-phase stator, it converts electrical energy into controlled rotary motion while supplying real-time position data to the drive through an integrated encoder. The mounting flange and smooth housing allow the motor to be installed in standardized machine frames. Its design supports applications that require accurate speed regulation and repeatable positioning under changing loads.
The housing has a 142 mm square flange, allowing it to be fastened directly to compatible gearheads or machine plates. Power and sensor cables exit through an angled swivel connector, which can be oriented to route the leads away from moving components without additional fittings. The unit follows the standard configuration for the platform, and its housing corresponds to length code 6. Heat is removed through self-cooling, eliminating the need for an external fan or liquid-cooling circuit. A smooth shaft transfers torque through a clamping coupling without requiring a keyway. The internal oil seal helps prevent lubricant leakage and protects the shaft interface from contamination. The motor has no holding brake, so an external brake or drive-applied torque must secure the load while the axis is stationary.
The motor operates at a rated speed of 2000 rpm, providing a moderate operating range that balances available torque with bearing service life. Rotor position is measured by an optical EnDat encoder, which delivers high-resolution digital feedback to the connected servo drive. The encoder uses EnDat protocol version 2.2 and supports automatic electronic nameplate data. Its resolution is listed as 25/0 bits, indicating 25 bits of single-turn position data and no multi-turn count. Absolute position is therefore available within one mechanical revolution, while movement across multiple revolutions must be tracked by the drive after startup. This feedback arrangement allows the controller to regulate position, speed, and torque without an additional external position sensor.
