8LSAA3.D9060S200-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSAA3.D9060S200-3 is a three-phase synchronous motor from the 8LS Synchronous Motors series, featuring a mounting flange and a 70 mm flange dimension. It offers a rated speed of 6000 rpm, uses inductive EnDat encoder technology, and comes equipped with a standard holding brake. The motor supports a single-cable hybrid connection and self-cooling with free air circulation.
Internal Product Review
The 8LSAA3.D9060S200-3 is a B & R Automation three-phase synchronous motor that stands out for polished servo performance. Self-cooling through free circulation and a single-cable hybrid connection support efficient operation and clean machine integration. Inductive EnDat 2.2 feedback is a key strength for accurate, repeatable positioning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSAA3.D9060S200-3 servo motor is produced by B&R Automation within the 8LS Synchronous Motors series. As a compact rotary actuator for automated machinery, it converts controlled AC drive current into precise mechanical rotation for indexing tables, gantries, and packaging axes. The unit belongs to the 8LSA configuration and uses the standard build without reinforced bearings. It is supplied with a mounting flange for direct integration into motor plates. This version carries product revision 3 and has length code 3, which indicates its stack size within the product range.
The motor has a 70 mm square flange that aligns with IEC motor interfaces, while its smooth shaft transmits torque without the stress concentrations associated with a keyway. No oil seal is fitted, so external sealing must be provided when the installation requires protection against oil or other fluids. The housing dissipates heat through self-cooling with free-circulation airflow, eliminating the need for an external fan and helping maintain a compact housing. The motor uses a three-phase synchronous design, and its stator supports a nominal speed of 6000 rpm for high-speed operation in a small frame. Connection hardware consists of a round power and feedback connector that provides a secure interface for the associated cable assembly.
Signal and power conductors are routed through a single-cable hybrid interface, reducing the number of separate wiring runs between the motor and drive. Position feedback is provided by an inductive EnDat sensor, and the drive uses EnDat 2.2 communication for feedback data and automatic parameter transfer. The encoder offers an absolute resolution of 19/12 bits for the single-turn position and multi-turn count, respectively. Its internal counter tracks up to 4096 revolutions before rollover, allowing the drive to retain absolute position information across multiple shaft rotations. A standard holding brake secures the shaft when the motor is disabled, helping prevent unintended movement of a stationary load. This brake supports applications in which the axis must remain fixed between commanded motion cycles or while drive power is unavailable.
