8LSA56.R0030D200-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 8LSA56.R0030D200-0 is a three-phase synchronous motor manufactured by B & R Automation and is part of the 8LS Synchronous Motors series. It features a resolver for encoder technology, self-cooling through free circulation, and has a standard holding brake. The motor comes with a 142 mm flange dimension and an angled connector, and operates at a rated speed of 3000 rpm.
Internal Product Review
The 8LSA56.R0030D200-0 is a three-phase synchronous motor that stands out for self-cooling, free circulation and a standard holding brake. Resolver feedback and a 3000 rpm rated speed support precise motion control and strong dynamic performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA56.R0030D200-0 synchronous motor is produced by B & R Automation for the 8LS Synchronous Motors series. Classified as a three-phase synchronous motor, it converts electrical energy into controlled rotary motion for coordinated axes in packaging machines, pick-and-place gantries, and other industrial automation equipment. The internal 8LSA designation indicates a standard build without reinforced bearings. Its associated length and size identifiers make the motor suitable for medium-torque applications that require a compact footprint and straightforward flange mounting. The motor can be paired with a compatible servo drive for closed-loop control of position, speed, and torque during repetitive machine cycles.
The motor reaches a rated speed of 3000 rpm, allowing the drive controller to achieve typical servo velocities without field weakening. Heat is removed through self-cooling with free air circulation, so no auxiliary blower or liquid cooling circuit is needed. A flange face measuring 142 mm provides the reference surface for mounting and helps align the motor with a gearbox or machine frame. Rotor position feedback is generated by a resolver, which supplies analog sine-cosine signals across a wide range of temperatures and vibration conditions. Power and feedback conductors terminate at a sealed connector, allowing the cables to be disconnected without altering the internal wiring. This connection arrangement also helps protect the electrical contacts from dust and incidental exposure to moisture in industrial settings.
A standard holding brake secures the shaft when power is disengaged, helping prevent load drift on vertical or indexing axes. Cable routing passes through an angled swivel connector housing, which supports strain relief where installation space is limited. Positional accuracy at the motor shaft is rated at 10 arcmin, making the motor suitable for applications with moderate servo tolerance requirements. The motor has no oil seal, so it should be installed where the shaft will not be exposed to pressurized lubricants. Length code 6 indicates the active stack depth used for this motor configuration. The smooth shaft end connects directly to a clamping coupling or pulley, allowing torque transfer without a keyed interface. The mounting arrangement provides a rigid mechanical reference for applications that require stable shaft alignment under changing loads.
