8LSA56.E1030D000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA56.E1030D000-1 is a three-phase synchronous motor from the 8LS Synchronous Motors series, featuring a mounting flange and a 142 mm flange dimension. It offers a rated speed of 3000 rpm and uses self-cooling with free air circulation. The motor is equipped with an optical EnDat 2.1 encoder and supports multi-turn capability up to 4096 revolutions.
Internal Product Review
The 8LSA56.E1030D000-1 is an impressive three-phase synchronous motor featuring self-cooling free circulation. Optical EnDat feedback with multi-turn capability to 4096 revs supports dependable position tracking, making this unit a strong choice for precision motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA56.E1030D000-1 is a three-phase synchronous servo motor produced by B&R Automation within the 8LS Synchronous Motors series. It is intended for positioning and velocity control tasks in automated machinery where compact rotary power and integrated feedback are needed. The motor belongs to the 8LSA configuration family and is supplied in the standard build without reinforced bearings. Precision electronic commutation allows the motor to drive industrial motion axes accurately while responding to commands from a compatible servo controller.
The motor achieves a rated speed of 3000 rpm, enabling direct coupling to gearboxes or belt stages that require high shaft velocity. Its 142 mm flange provides the face size needed for attachment to compatible machine frames, while length code 6 indicates the selected motor length. Thermal management relies on self-cooling through free air circulation, so no external blower or liquid cooling jacket is required. Power and feedback leads exit through an angled swivel connector housing, which can be oriented to reduce cable strain where installation space is limited. Motion is transmitted through a smooth shaft that accommodates shrink-fit or clamp couplings without requiring a keyway. The motor is supplied without an oil seal, making it appropriate for dry enclosures that protect the shaft area from coolant and contaminants.
Rotor position is measured by an optical encoder that uses an EnDat 2.1 interface for communication with the drive. The sensor provides 13/12-bit single-turn and multi-turn resolution, supporting fine position measurement over each revolution and absolute feedback after power cycles. Its multi-turn range of 4096 revolutions allows long-travel axes to retain position information across numerous shaft rotations without requiring a homing cycle after each startup. Mechanical attachment uses a mounting flange, which supports accurate alignment when the motor is secured to a machine surface or gearbox. A holding brake is not included, so stationary loads must be retained by drive-applied torque or an external clamping device. The optical feedback system supports closed-loop position and speed regulation by continuously reporting rotor movement to the connected drive.
